Posts: 1,745
Threads: 252
Joined: Dec 2011
Reputation:
0
Hello, since today I've been having some issues with windows.. it crashed with a bluescreen then didn't let me login till i rebooted some time later and now some programs are not working. Tried to system restore to yesterday it then said "This program has stopped responding" I then see if its a .dll issue by going into cmd prompt and putting in "sfc /scannow" it then goes to 30% and then says cannot perform this action. I have scanned for viruses (avg) and none were found.. What do you suggest I do ?
EDIT: did the sfc scan again and it said it found corrupt files but was unable to fix them..
Posts: 1,391
Threads: 85
Joined: Sep 2012
Reputation:
0
This happened to me before and I tried everything you tried, but no use, so I just gave up and installed a new copy of windows.
Posts: 1,861
Threads: 103
Joined: Sep 2011
Reputation:
0
You can do the above, or try ccleaner. Maybe a corrupt register? ccleaner cleans unused stuff, and has a register repair option, or something. I had the exact same thing you have, and someone suggested using that program. It did the trick for me.
Good luck!
Posts: 1,745
Threads: 252
Joined: Dec 2011
Reputation:
0
I don't have the windows (or the key) as all the building the pc and installing the os was at my granddad's and he owned the os. I've tried system restore which is now working and restoring to yesterdays backup. If this doesn't work, I'll try ccleaner then I'll have to wait a few weeks to get another os from my granddad.
Posts: 2,364
Threads: 135
Joined: Dec 2009
Reputation:
0
You can view your key in the properties on "Computer"
But then u would need a win installation.
But check if any unnecessary processes are running, do a safe boot see if the problem is the same!
Also change the windows boot options to just load Windows's .dlls/processes
Posts: 82
Threads: 0
Joined: Apr 2013
Reputation:
0
Usually page faults are caused by the following
Seriously dodgy software on your pc (Try re-installing your ATI Drivers)
Faulty Ram
Fault HDD
I would recommend re-installing windows (once you have re-installed your ATI Drivers) and seeing if you get the errors again, if you do you know you have a hardware fault.
Posts: 1,765
Threads: 1
Joined: Aug 2011
Reputation:
0
Well I've provided you with the solutons for both, I never knew you've made this though... When we altered the 'RAM' speed setting in the BIOS to what you believe to be the actual speed as your Mbo was gettng it wrong you may nw be locking off RAM, is all your RAM the same speed?
Posts: 1,765
Threads: 1
Joined: Aug 2011
Reputation:
0
Well you could see how much RAM you computer has detected in Task manager, alternatively check the box. If you've locked off RAM your programs may not have enough RAM to launch, this seems unlikely but some programs quit the launching phase if the RAM is full.
This forum requires that you wait 120 seconds between posts. Please try again in 44 seconds. - This is very annoying and why its better to discuss it with me in Skype -.-
Posts: 1,745
Threads: 252
Joined: Dec 2011
Reputation:
0
Because I can't open skype and it's hard to speak on phone. I looked on the box and it said 1600 so thats what I set it to..
On task manager it says 2.84gb is being used and free is 1756
Windows has detected 8gb ram 7.45gb usable
Posts: 1,745
Threads: 252
Joined: Dec 2011
Reputation:
0
I don't have a dvd drive on my pc :/
Posts: 1,745
Threads: 252
Joined: Dec 2011
Reputation:
0
I still have my old pc.. I don't know if I can open that and use that hdd?
