[MrSnapp]

Here is a pic:




and here are the codes:

pawn Код:

else if(IsACop(playerid) && IsPlayerInRangeOfPoint(playerid, 7, 1263.7299,-1601.2197,8.4360)) // SAPD Gate
    {
        if(!SAPDGateStatus)
        {
            SAPDGateStatus = 1;
            MoveDynamicObject(SAPDGate, 1588.6501464844, -1638.0750732422, 6.2343215942383, 3);
        }
        else
        {
            SAPDGateStatus = 0;
            MoveDynamicObject(SAPDGate, 1588.6428222656, -1638.02734375, 15.240161895752, 3);
        }
        return 1;
    }

Could anyone please help?

[Niko_boy]

it is obvious to mess up as rotation x y z and angles might be wrong
so you need to retake coordinates with perfect coordinates

[MrSnapp]

Is there any easier or better way then typing /save?

[Marricio]

Map the gate again, the Z rotation coordenate is not right.

[razor steven]

I think you should startover, with correct coordinates.

[MrSnapp]

But if this area is custom and I map the gate again in MTA the building will not be there...

[MrSnapp]

I got the perfect coordinates from an in game gate editor except I want the gate to be faction restricted. here are the coords:

pawn Код:

971|1273.845703|-1606.285278|10.986078|0.900001|0.700001|-29.700014|1267.072021|-1602.421264|11.081331|0.900001|0.700001|150.899963||2.000000

Where should I put these in the code I listed?

[ikbenremco]

pawn Код:

else if(IsACop(playerid) && IsPlayerInRangeOfPoint(playerid, 7, 1273.845703,-1606.285278,10.986078)) // SAPD Gate
    {
        if(!IsACop(playerid)) return SendClientMessage(playerid, COLOR_GREY, "You are not an SAPD Oficer.");
        if(!SAPDGateStatus)
        {
            SAPDGateStatus = 1;
            MoveDynamicObject(SAPDGate, 1273.845703,-1606.285278,-5.986078, 3);
        }
        else
        {
            SAPDGateStatus = 0;
            MoveDynamicObject(SAPDGate, 1273.845703,-1606.285278,10.986078, 3);
        }
        return 1;
    }

[BlackBank]

I don't know exactly where you want the gate pos, but you can just change the Z position.
So that means that the Z(you can also call it height) is the same position when you close and open the door.