[CrazyChoco]

Command to Access the dialog:

Код:

Code:
	if (strcmp("/ab", cmdtext, true, 3) == 0)
	{
	if(PlayerInfo[playerid][AdminLevel] >= 1)
	{
 		ShowPlayerDialog(playerid, 3,DIALOG_STYLE_LIST, "Admin Base", "1.Bridge Up\r\n2.Bridge Down\r\n3.Entrance Open\r\n4.Entrance Close\r\n5.Runway Extend\r\n6.Runway Retract\r\n7.Runway Gate Open\n\8.Runway Gate Close","Select", "Close");
	}
	else
	{
		SendClientMessage(playerid,0xFF0000AA,"Bad Command. Type /cmds for available commands depending on your chosen job/skill");
	}
	return 1;
	}

Dialog:
Code:

Код:

	
if(dialogid == 3)
    	{
        switch(3)
        {
            case 1:
                {
                    MoveObject(Bridge,262.30819702148, 2998.6782226563, 10.946338653564, 3.00); // UP
                }
            case 2:
                {
                    MoveObject(Bridge,262.30819702148,2998.6782226563,-27.553661346436, 3.00); // DOWN
                }
            case 3:
                {
                    MoveObject(Abg2,250.58392333984,3113.0004882813,15.086917877197,3.00); // OPEN
                }
            case 4:
                {
       				MoveObject(Abg2,262.33248901367, 3113.1955566406, 15.086917877197, 3.00); // CLOSE
                }
            case 5:
                {
   					MoveObject(Runway,84.14793396,3430.49975586,12.99578094,3.00); // OPEN
                }
            case 6:
                {
                    MoveObject(Runway,84.10546875, 3252.544921875, 12.995780944824,3.00); // CLOSE
                }
            case 7:
                {
 					MoveObject(Fence,167.64741516, 3358.28222656, 15.24813843, 3.00); // OPEN
                }
            case 8:
                {
					MoveObject(Fence,126.14834594727, 3358.478515625, 15.248138427734,3.00); // CLOSE
                }
            }
        }
    }
    return 0;
}

The problem is that when i want the objects to move nothing happens.

[Fires]

Make sure you createobject doesn't use streamer.. so if you use CreateDynamicObject use MoveDynamicObject.. or if you use CreateObject use MoveObject

[CrazyChoco]

Okaii thanks, ill test and see if it works if it does ill rep+ you

[Fires]

Ok

[CrazyChoco]

Thanks for your help!! its worked but i changed a little bit so its easiere thanks

[ColdRain]

Crazy i think you should start from case 0:
not case 1:

if you start from case 1: maybe some clicks will not work ...

[Fires]

Use this

pawn Код:

if(dialogid == 3)
        {
        switch(listitem)
        {
            case 0:
                {
                    MoveObject(Bridge,262.30819702148, 2998.6782226563, 10.946338653564, 3.00); // UP
                }
            case 1:
                {
                    MoveObject(Bridge,262.30819702148,2998.6782226563,-27.553661346436, 3.00); // DOWN
                }
            case 2:
                {
                    MoveObject(Abg2,250.58392333984,3113.0004882813,15.086917877197,3.00); // OPEN
                }
            case 3:
                {
                    MoveObject(Abg2,262.33248901367, 3113.1955566406, 15.086917877197, 3.00); // CLOSE
                }
            case 4:
                {
                    MoveObject(Runway,84.14793396,3430.49975586,12.99578094,3.00); // OPEN
                }
            case 5:
                {
                    MoveObject(Runway,84.10546875, 3252.544921875, 12.995780944824,3.00); // CLOSE
                }
            case 6:
                {
                    MoveObject(Fence,167.64741516, 3358.28222656, 15.24813843, 3.00); // OPEN
                }
            case 7:
                {
                    MoveObject(Fence,126.14834594727, 3358.478515625, 15.248138427734,3.00); // CLOSE
                }
            }
        }
    }
    return 0;
}

[CrazyChoco]

Sp i have to start from case 0: ?

[Fires]

Yes

And not use switch(3), but switch(listitem)

Use the script i posted above

[CrazyChoco]

Okai thanks for your help