[Scott_Williams]

If I try to open the gate to lspd for example nothing happens and in the server.log i see the next message:

Код:

MoveDynamicObject: Expecting 8 parameter(s), but found 5

how i can fix the problem?
I use the streamer version 2.6

[Madd Kat]

well without seeing any code it seams your not passing enough parameters to the MoveDynamicObject function
it expects 8 and your passing 5.

find the code that opens the gate and check to make sure your passing all 8 params

[Mark™]

pawn Код:

MoveDynamicObject(objectid, Float:x, Float:y, Float:z, Float:speed);

thats the syntax, checkout which params your missing and add them relevantly.

[aRoach]

Quote:

Originally Posted by Xtreme_playa pawn Код: MoveDynamicObject(objectid, Float:x, Float:y, Float:z, Float:speed); thats the syntax, checkout which params your missing and add them relevantly.

You failed!

The sintax is:

pawn Код:

MoveDynamicObject( objectid, Float:x, Float:y, Float:z, Float:speed, Float:rX = -1000.0, Float:rY = -1000.0, Float:rZ = -1000.0 );

Now check out your parameters and add the others...

[Mark™]

Quote:

Originally Posted by aRoach You failed! The sintax is: pawn Код: MoveDynamicObject( objectid, Float:x, Float:y, Float:z, Float:speed, Float:rX = -1000.0, Float:rY = -1000.0, Float:rZ = -1000.0 ); Now check out your parameters and add the others...

that was taken from incognito's streamer plugin, from the list of native functions related to objects

pawn Код:

native MoveDynamicObject(objectid, Float:x, Float:y, Float:z, Float:speed);

You need to read that thread again.

[Madd Kat]

lol well looks like the last 3 are optional but some reason causing this person an error,

Scott you are infact using streamer by incognito correct?

[Konstantinos]

But at the console it says that Expecting 8 parameter(s), but found 5

pawn Код:

MoveDynamicObject( objectid, Float:X, Float:Y, Float:Z, Float:Speed, Float:RotX = -1000.0, Float:RotY = -1000.0, Float:RotZ = -1000.0 )

Then don't use 5 and use the 8 parameters.

[niels44]

why doing so difficult? im using just moveobject and thats working fine too,
i know if i make a lot of gates then it will reach his limit and i will need streamer but i cant imagine you will create very much gates so just use moveobject...

[aRoach]

Quote:

Originally Posted by Xtreme_playa that was taken from incognito's streamer plugin, from the list of native functions related to objects pawn Код: native MoveDynamicObject(objectid, Float:x, Float:y, Float:z, Float:speed); You need to read that thread again.

I've readed it, and yeah, the last 3 are OPTIONAL, but this causes the problem so ...

[Mark™]

Quote:

Originally Posted by aRoach I've readed it, and yeah, the last 3 are OPTIONAL, but this causes the problem so ...

yeah i dont understand why its causing syntax error while the syntax itself is of 5 params. Edit: he's using v2.6 so the syntax might have changed from 5 to 8 params.

[niels44]

as i said before why just dont use moveobject?! its less difficult

[aRoach]

Quote:

Originally Posted by niels44 as i said before why just dont use moveobject?! its less difficult

The natives have the same parameters:

• MoveObject:
  
  Code:

  native MoveObject(objectid, Float:X, Float:Y, Float:Z, Float:Speed, Float:RotX = -1000.0, Float:RotY = -1000.0, Float:RotZ = -1000.0);

• MoveDynamicObject:
  
  Code:

  native MoveDynamicObject(objectid, Float:x, Float:y, Float:z, Float:speed, Float:rX = -1000.0, Float:rY = -1000.0, Float:rZ = -1000.0);