Problems with a large stove - Printable Version

Problems with a large stove - Printable Version

+- SA-MP Forums Archive (https://sampforum.blast.hk)
+-- Forum: SA-MP DL Edition (https://sampforum.blast.hk/forumdisplay.php?fid=92)
+--- Forum: SA-MP 0.3.DL (https://sampforum.blast.hk/forumdisplay.php?fid=90)
+--- Thread: Problems with a large stove (/showthread.php?tid=647713)

Problems with a large stove - Laoter - 09.01.2018

Hi, please help.
I created a large slab and loaded it into the game everything worked fine...
Then I made the roads on this plate
Now I have problems with col.
The plate on one side became invisible
On the other hand, the col. are broken and part of the plate shines through
How do I fix it? I apologize for my English

Re: Problems with a large stove - ZaikerH - 09.01.2018

I do not understand well.
Which problem you have?

Re: Problems with a large stove - Laoter - 09.01.2018

The plate on one side is transparent...
On the other hand, the plate sometimes shines through
Col. superimposed for some reason with an error in some places I'm standing in the air

Re: Problems with a large stove - ZaikerH - 09.01.2018

Okay.
Can you send the file by private message? That way I check it, and see how I can help you.

Re: Problems with a large stove - Laoter - 09.01.2018

Thank you, I sent the files to you

Re: Problems with a large stove - ZaikerH - 09.01.2018

Quote:

Originally Posted by Laoter

Thank you, I sent the files to you

Perfect, I'll start checking and I'll notify you by private message when I fix it.

Re: Problems with a large stove - Laoter - 09.01.2018

Thank you, I will wait for your reply.

Re: Problems with a large stove - H4bdel - 09.01.2018

Try increasing the draw and stream distance of the object.

Re: Problems with a large stove - Laoter - 09.01.2018

I put a plate even over the sea and nothing changes

Re: Problems with a large stove - ZaikerH - 09.01.2018

Check your messages.

Re: Problems with a large stove - Laoter - 09.01.2018

unfortunately the bug remained

I think the problem is in col.

Re: Problems with a large stove - ZaikerH - 09.01.2018

Quote:

Originally Posted by Laoter

unfortunately the bug remained

I think the problem is in col.

I'll check the object inside the game, to see what problem it is.
Yes, apparently it is the collision.

Re: Problems with a large stove - ZaikerH - 09.01.2018

I already fixed the collision.
It's just that your object is too big.
When you are going to create an object, you must correctly measure In-Game, when replacing a model, or others, it's just a piece of advice.

Re: Problems with a large stove - Laoter - 09.01.2018

did not quite understand how to fix the problem? reduce the size ?

what then is the maximum size you can do?

Re: Problems with a large stove - ZaikerH - 09.01.2018

Quote:

Originally Posted by Laoter

did not quite understand how to fix the problem? reduce the size ?

What I want to say, is that when adding a new model, you must calculate an exact size.
For example, I once created a platform, in which the size was the following.

PD: Check your messages.

My platform, it was this size.
https://i.imgur.com/bmuqxUW.jpg

Re: Problems with a large stove - Laoter - 09.01.2018

I wanted to make a big platform with roads

and wanted to make it one platform which maximum sizes can I use?

Re: Problems with a large stove - ZaikerH - 09.01.2018

Quote:

Originally Posted by Laoter

I wanted to make a big platform with roads

and wanted to make it one platform which maximum sizes can I use?

Check your messages, send the platform, try it.
With respect to the other, you can create the platform, but of a certain size, and then you create another platform, and so on.

Re: Problems with a large stove - Kasis - 09.01.2018

https://sampforum.blast.hk/showthread.php?tid=647575