[Alex_T]

Internal_____________________________________Exter nal
IP Address | Start Port | End Port | IP Address | Start Port | End Port | Prot | Description | Enabled
192.168.0.** | 7777 | 7777 | 0.0.0.0 | 7777 | 7777 | BOTH | SAMP | Yes

Is that all correct?

[TheSnaKe]

It will be better if you take a picture of this.

[Mandeep148]

hi,
which modem r u using?
i am using tp-link,
use this setting.
Rule 1 Application - - Protocol -UDP Start Port -7777 End Port-7777 Local IP Address 192.1**.*.*** (your ip address, open "run" then open cmd then write "ipconfig" then IPv4 Address. . . . . . . . . . . : 19*.***.*.*** )
add on your modem like that
Rule 1 Application - - Protocol -UDP Start Port -7777 End Port-7777 Local IP Address 192.1**.*.***