09.10.2012, 14:01
HOW TO ADD IN MAPING TO UR SCRIPT OR FILTERSCRIPT
Hello everyone, this is a basic tutorial on how to add in the mapping codes into your samp server.
So
1) Copy the mapping codes
2) open up the PAWNO (Should be in your script)
3) Click "Open" , then select your GM (should be a .pwn)
4) Once you have done that, click on "Find" (It has the pic of binoculars) And type in " Ongamemodeinit "
5) Press enter from the ongamemodeinit.
6) paste the mapping codes into it.
7) Select the codes you just put in, press the TAB Button on ur keyboard.
Click on save, then Compile , then your done.
FOR A FILTERSCRIPT:
Open up Pawno, click on NEW
Click on find > find Ongamemodeinit
Click under that word and paste your mapping codes under the Ongamemodeinit
Select the codes you just put in and press the TAB Key on your keyboard.
Under that, it should say SetGameModeText - In the bit how it says ("Blank Script") , Change it to your GM Version
EXAMPLE: ("AFRP v1.1")
Then, save/compile it
Then exit out of pawno
Then open up Server.CFG
Then look for Filterscripts
At the end of that word, press space, then put in the name of your filterscript .
So like this: filterscripts Map_Test
Done and dont forget to +rep if it helped you!
Cya and good luck!
Hello everyone, this is a basic tutorial on how to add in the mapping codes into your samp server.
So
1) Copy the mapping codes
2) open up the PAWNO (Should be in your script)
3) Click "Open" , then select your GM (should be a .pwn)
4) Once you have done that, click on "Find" (It has the pic of binoculars) And type in " Ongamemodeinit "
5) Press enter from the ongamemodeinit.
6) paste the mapping codes into it.
7) Select the codes you just put in, press the TAB Button on ur keyboard.
Click on save, then Compile , then your done.FOR A FILTERSCRIPT:
Open up Pawno, click on NEW
Click on find > find Ongamemodeinit
Click under that word and paste your mapping codes under the Ongamemodeinit
Select the codes you just put in and press the TAB Key on your keyboard.
Under that, it should say SetGameModeText - In the bit how it says ("Blank Script") , Change it to your GM Version
EXAMPLE: ("AFRP v1.1")
Then, save/compile it
Then exit out of pawno
Then open up Server.CFG
Then look for Filterscripts
At the end of that word, press space, then put in the name of your filterscript .
So like this: filterscripts Map_Test
Done and dont forget to +rep if it helped you!
Cya and good luck!
