[newbienoob]

I don't know how to port forward my samp server with TP-Link TD-W8901G. Already check at portforward.com. But I'm stuck here

http://portforward.com/english/route...-MP_Server.htm
Help me please

[sanjil_rijal]

Dude i did the same and my router model is totally same to urs just cre8 it by writing ur ip and 7777 in start and end port choosing it to UDP i did it all but still my server aint online

[[Ez]Panther]

lol i used 2 have this then i changed to virgin more easyer for this lol as he says ^^

[newbienoob]

Quote:

Originally Posted by OldSkoolRap There are several versions of the model that you have, but in general you can do port forwarding, that this vendor call "virtual server". If you know the concept just Choose “Advanced Setup→NAT→Virtual Server”. The Virtual Server is the server or server(s) behind NAT (on the LAN), for example, Web server or FTP server, that you can make visible to the outside world even though NAT makes your whole inside network appear as a single machine to the outside world. To add a virtual server entry: Step 1: Select the “Virtual Circuit” and select “Virtual Server”. Note: If your Internet Provider only gave you a single IP address (that is the usual), select Single; with multiple IPs, select Multiple for the option. Step 2: Select the Rule index for the rule. Step 3: Select the application you want from drop-down list, then the protocol and port number will be added to the corresponding field automatically, you only need to configure the IP address for the virtual server; If the application list does not contain the service that you want (in your case is HTTP_Server), please configure the Port number, IP Address and Protocol manually. Step 4: After that, click SAVE to make the entry take effect.

now that's what im looking for. thx you deserve a +rep

[Ptcl®]

This Will help you.

Код:

Application = GTASAMP
Protocal = All
Start Port Number = 7777 (Change it to your own wish port)
End Port Number = 7777   (This should be the same as Start Port number)
Local Ip Addres

open RUN/CMD and type in [ ipconfig ] copy the ipv4 addres and paste it to

Код:

Local Ip Addres = 192.168.1.x

Hope i helped !

[bashar0151]

why dont you try using protfoward.com portopner software that what i used yo tell what port you want topen it opens it for you http://portforward.com/store/pfconfig.cgi

[kikito]

You just need to do the next things:
FIrst of all, go to your cmd center on windows, and type: ipconfig.
after that, take your local ip(ipv4) wich should look like this: 192.168.1.x (my local is 192.168.1.35)
Go to your router, on the port forward,
at the start port, add 7777, on the end port, the same(7777)
the server ip, add your local ip, the one that you taken from cmd center.
save the configuration done, and you're done.
You will not see your server online from the external ip, but your friends will see it.
To connect to your server, just enter on the sa-mp client, 127.0.0.1:7777