[Include] MidoStream - Flexible Object Streamer
#61

KEWL might use it
Reply
#62

Is there any way to make a large ammount of objects next to each other work? I have like mhmm 50 objects or so (not sure) in a close area, + like 1000 near by and the one in close area aren't showing up..
Reply
#63

im having a problem when i use mido stream in my server

the server runs at below is with 10 players

CPU Usage: 2 %
Memory usage: 8.09 mb
Space in use: 29 mb


now when i have midostream and my objects fs running with 3000 objects

CPU Usage: 31 %
Memory usage: 20.24 mb
Space in use: 28 mb



any ideas?
Reply
#64

My friend is having some problems with this, his (my map) objects doesn't show up!
what is wrong
Reply
#65

i don't have problems...its a good streamer....i have tested it whit 10.000 objects and hi works perfeclty sry for my bad english ^^"
Reply
#66

This is the easiest way! I recommend this Streamer!
Reply
#67

what happens if you set the "MAX_STREAM_OBJECTS" wrong? (Too much for example)
Reply
#68

Thanks, That I was Looking =)
Reply
#69

Quote:
Originally Posted by (ed!med!
what happens if you set the "MAX_STREAM_OBJECTS" wrong? (Too much for example)
The AMX size will become massive if you do it too high.
Reply
#70

C:\Documents and Settings\Owner\My Documents\My Received Files\SERVER1234567890\gamemodes\lva.pwn(12) : fatal error 100: cannot read from file: "MidoStream"

Compilation aborted.Pawn compiler 3.2.3664 Copyright © 1997-2006, ITB CompuPhase


1 Error. someone help plz
Reply
#71

Quote:
Originally Posted by Panoulis
Посмотреть сообщение
Damn, can someone explain me what does this means ?

"warning 202: number of arguments does not match definition"

I made everything correct BUT when i changed all CreateObject's codes to CreateStreamObject the WHOLE objects had Warns
did you converted at http://maps.serverhex.com? if u do . then its all right and you must include Midostream on your gamemode or whereever is your objects.

pawn Код:
#include <Midostream>
Reply
#72

so where do i get the cords of the object ?
Reply
#73

Quote:
Originally Posted by Berlovan
Посмотреть сообщение
so where do i get the cords of the object ?
You can create objects with MTA and convert it...
Reply
#74

thank you
Reply
#75

How does this streamer works loading objects? cause im using incognito's streamer but always ppl falls down when entering into mapped interior :S
Reply
#76

Quote:
Originally Posted by SeQualX
Посмотреть сообщение
How does this streamer works loading objects? cause im using incognito's streamer but always ppl falls down when entering into mapped interior :S
Check Icognito's thread, and read carefully the thread. It's clear said that Icognito's Streamer has Virtual Worlds, and Interiors.

You must set the object's interior to the specified interior.

https://sampforum.blast.hk/showthread.php?tid=102865

The function:
Код:
native CreateDynamicObject(modelid, Float:x, Float:y, Float:z, Float:rx, Float:ry, Float:rz, worldid = -1, interiorid = -1, playerid = -1, Float:distance = 200.0);
Example:
Код:
CreateDynamicObject(12345, 0.0,  0.0,  0.0,  0.0,  0.0,  0.0, -1, INTERIORID, -1, 200.0);
Set INTERIORID To your interior id.
Reply
#77

Thats not the problem, the problem is that theres a delay loading the objets so the players falls down while the objects loads, xStreamer is faster doing this cause ppl almost never falls.
Reply
#78

I have a problem with MidoStream.
In samp 0.3c i put distance in 200.0 and in 300.0 and i can see objects in the server but transparent
Reply
#79

Swat007forever,download this streamer for 0.3b,it helps me!!
Reply
#80

all objetcts u only see if you are 2 feet away and they are transparant
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)