[Alvitr]

umm..

in my case,
when i compiled with sublime,that .amx have changed.

maybe some parameter is wrong in Pawn.sublime-build i guess..? or build system wrong..

[Micko123]

Can you send me your sublime-build if you have them??
BUt with your parameters if that is not problem. I will just change it to mine

[Alvitr]

sure,

this is my Pawn.sublime-build in Packages\User\

PHP код:

{
    "cmd": ["${project_path:${folder}}/pawncc.exe", "$file_name", "-;+", "-v2", "-d3", "-\\)+"],
    "working_dir": "${file_path}",
    "file_regex": "^([^\\.]+\\.pwn)\\((\\d+)\\)() : (.*)$",
    "variants": [
        {
            "cmd": ["${project_path:${folder}}/pawncc.exe", "$file_name", "-;+", "-v2", "-d3", "-\\)+", "-l"],
            "working_dir": "${file_path}",
            "name": "Preprocessed output"
        },
        {
            "cmd": ["${project_path:${folder}}/pawncc.exe", "$file_name", "-;+", "-v2", "-d3", "-\\)+", "-a"],
            "working_dir": "${file_path}",
            "name": "P-code output"
        }
    ]
} 


and, i'm set my Project Folder at pawno document.

[Micko123]

Did you change workin_dir and cmd: ??

[Alvitr]

no, everything default

if you add Project Folder ,
than everything will be ok.

cause "working_dir" will load ${file_path} (where's pwn at)
${project_path:${folder}}/pawncc.exe will load Project Folder so like
Project Folder/pawncc.exe

[Micko123]

PHP код:

{
    "cmd": ["pawncc.exe", "-i includes", "$file", "-;+", "-d3", "-\\)+"],
    "working_dir": "C:\\Users\\Micko\\Desktop\\MySQL\\pawno",
    "file_regex": "^([^\\.]+\\.pwn)\\((\\d+)\\)() : (.*)$",
    "variants": [
        {
            "cmd": ["pawncc.exe", "-i includes", "$file",  "-;+", "-d3", "-\\)+", "-l"],
            "working_dir": "C:\\Users\\Micko\\Desktop\\MySQL\\pawno",
            "name": "Preprocessed output"
        },
        {
            "cmd": ["pawncc.exe", "-i includes", "$file",  "-;+", "-d3", "-\\)+", "-a"],
            "working_dir": "C:\\Users\\Micko\\Desktop\\MySQL\\pawno",
            "name": "P-code output"
        }
    ]
} 


I did it like that. It is compiled as it should be but it is not affecting .amx. Only .pwn. Should I add something somewhere or should I remove something??
I don't get where to put what.. I am sorry guys for this

[Alvitr]

umm..

you might not change anything with these at Pawn.sublime-build:

PHP код:

{
    "cmd": ["${project_path:${folder}}/pawncc.exe", "$file_name", "-;+", "-v2", "-d3", "-\\)+"],
    "working_dir": "${file_path}",
    "file_regex": "^([^\\.]+\\.pwn)\\((\\d+)\\)() : (.*)$",
    "variants": [
        {
            "cmd": ["${project_path:${folder}}/pawncc.exe", "$file_name", "-;+", "-v2", "-d3", "-\\)+", "-l"],
            "working_dir": "${file_path}",
            "name": "Preprocessed output"
        },
        {
            "cmd": ["${project_path:${folder}}/pawncc.exe", "$file_name", "-;+", "-v2", "-d3", "-\\)+", "-a"],
            "working_dir": "${file_path}",
            "name": "P-code output"
        }
    ]
} 


and do -> Project -> Add Folder to Project -> select your pawno folder.

it might work good.

final check what build system do you use at Tool -> Build System

cause when you build, it will do like pawno,
compile that pwn and make amx in same document as i know..

but maybe im fault or x___x

buy the way , you can change or add compile options at , "-;+", "-v2", "-d3", "-\\)+", "-l"],

[Micko123]

Okay I got it working finally.. It is effecting .amx
Here is the full code for Pawn.sublime-build

PHP код:

{
    "cmd": ["pawncc.exe", "-d3 -r -i includes", "$file", "-;+"],
    "path": "C:\\Users\\Micko\\Desktop\\MySQL\\pawno"
} 


AND THIS IS THE FULL CODE YOU NEED!! Nothing else!

[Alvitr]

nice job!

do you using sublime 2 ;___;?

[Micko123]

3 xD

[Alvitr]

Quote:

Originally Posted by Micko123 3 xD

what happenedddddd

(X w X)/

but thank you, i learned something about it/

[Micko123]

Well you probably learned not to answer my posts xD

Thank you m8 for everything