Q: My WiFi is hacked?!
#1

Hi everyone,

I need help on this. I'm sure my WiFi network is hacked because I saw two unknown devices in the DHCP (No wonder internet seems to be slow starting from months ago!!!) when I checked my router settings page. Then I instantly changed the password and reboot it. Then internet seems to be fast again! But after some minutes its slow again - probably they hacked my Wi-Fi again wtf (No downloads or whatever is running) Now I can't enter the router page, I don't know what to do. Internet is so slow right now.

About the password, what shall I do so that the hackers wouldn't be able to hack into my WiFi again in the future?
Reply
#2

Not sure about "what shall I do so that the hackers wouldn't be able to hack into my WiFi again in the future?"

But if you want your password back Reset your Router (not just a simple restart means factory/hard reset).

Just my opinion.
Reply
#3

try to use a simple password with hard words like:
';.,&68$#^^19|

for password i think you can call your telecommunication to reset it ,also some routers have a buttom inside to reset administrator panel password
Reply
#4

Quote:

for password i think you can call your telecommunication to reset it ,also some routers have a buttom inside to reset administrator panel password

Also there is some small hole behind the router just press it with stick or it depends on how big is the hole and who can fit to click it.


BUT, if you want not to risk call your Service provider for Futher Assistance.
Reply
#5

Disable it and ask your ISP. for help.
Reply
#6

try to change it to a strong password
Reply
#7

Step 1. Open your router settings page

First, you need to know how to access your wireless router’s settings. Usually you can do this by typing in “192.168.1.1” into your web browser, and then enter the correct user name and password for the router. This is different for each router, so first check your router’s user manual.

You can also use ****** to find the manuals for most routers online in case you lost the printed manual that came with your router purchase. For your reference, here are direct links to the manufacturer’s site of some popular router brands – Linksys, Cisco, Netgear, Apple AirPort, SMC, D-Link, Buffalo, TP-LINK, 3Com, Belkin.

Step 2. Create a unique password on your router

Once you have logged into your router, the first thing you should do to secure your network is to change the default password* of the router to something more secure.

This will prevent others from accessing the router and you can easily maintain the security settings that you want. You can change the password from the Administration settings on your router’s settings page. The default values are generally admin / password.
[*] What do the bad guys use – This is a public database of default usernames and passwords of wireless routers, modems, switches and other networking equipment. For instance, anyone can easily make out from the database that the factory-default settings for Linksys equipment can be accessed by using admin for both username and password fields.

Step 3. Change your Network’s SSID name

The SSID (or Wireless Network Name) of your Wireless Router is usually pre-defined as “default” or is set as the brand name of the router (e.g., linksys). Although this will not make your network inherently* more secure, changing the SSID name of your network is a good idea as it will make it more obvious for others to know which network they are connecting to.

This setting is usually under the basic wireless settings in your router’s settings page. Once this is set, you will always be sure that you are connecting to the correct Wireless network even if there are multiple wireless networks in your area. Don’t use your name, home address or other personal information in the SSID name.

Also see: Change Network Name to Prevent Wi-Fi Theft
[*] What do the bad guys use – Wi-Fi scanning tools like inSSIDer (Windows) and Kismet (Mac, Linux) are free and they will allow anyone to find all the available Wireless Networks in an area even if the routers are not broadcasting their SSID name.

Step 4. Enable Network Encryption

In order to prevent other computers in the area from using your internet connection, you need to encrypt your wireless signals.

There are several encryption methods for wireless settings, including WEP, WPA (WPA-Personal), and WPA2 (Wi-Fi Protected Access version 2). WEP is basic encryption and therefore least secure (i.e., it can be easily cracked*, but is compatible with a wide range of devices including older hardware, whereas WPA2 is the most secure but is only compatible with hardware manufactured since 2006.

To enable encryption on your Wireless network, open the wireless security settings on your router’s configuration page. This will usually let you select which security method you wish to choose; if you have older devices, choose WEP, otherwise go with WPA2. Enter a passphrase to access the network; make sure to set this to something that would be difficult for others to guess, and consider using a combination of letters, numbers, and special characters in the passphrase.
[*] What do the bad guys use – AirCrack and coWPAtty are some free tools that allow even non-hackers to crack the WEP / WPA (PSK) keys using dictionary or brute force techniques. A video on ******* suggests that AirCrack may be easily used to break WiFi encryption using a jail-broken iPhone or an iPod Touch.

Step 5. Filter MAC addresses

Whether you have a laptop or a Wi-Fi enabled mobile phone, all your wireless devices have a unique MAC address (this has nothing to do with an Apple Mac) just like every computer connected to the Internet has a unique IP address. For an added layer of protection, you can add the MAC addresses of all your devices to your wireless router’s settings so that only the specified devices can connect to your Wi-Fi network.

MAC addresses are hard-coded into your networking equipment, so one address will only let that one device on the network. It is, unfortunately, possible to spoof a MAC address*, but an attacker must first know one of the MAC addresses of the computers that are connected to your Wireless network before he can attempt spoofing.

To enable MAC address filtering, first make a list of all your hardware devices that you want to connect to your wireless network**. Find their MAC addresses, and then add them to the MAC address filtering in your router’s administrative settings. You can find the MAC address for your computers by opening Command Prompt and typing in “ipconfig /all”, which will show your MAC address beside the name “Physical Address”. You can find the MAC addresses of Wireless mobile phones and other portable devices under their network settings, though this will vary for each device.
[*] What do the bad guys use – Someone can change the MAC address of his or her own computer and can easily connect to your network since your network allows connection from devices that have that particular MAC address. Anyone can determine the MAC address of your device wireless using a sniffing tool like Nmap and he can then change the MAC address of his own computer using another free tool like MAC Shift.

Step 6. Reduce the Range of the Wireless Signal

If your wireless router has a high range but you are staying in a small studio apartment, you can consider decreasing the signal range by either changing the mode of your router to 802.11g (instead of 802.11n or 802.11b) or use a different wireless channel.

You can also try placing the router under the bed, inside a shoe box or wrap a foil around the router antennas so that you can somewhat restrict the direction of signals.

Apply the Anti-Wi-Fi Paint – Researchers have developed a special Wi-Fi blocking paint that can help you stop neighbors from accessing your home network without you having to set up encryption at the router level. The paint contains chemicals that blocks radio signals by absorbing them. “By coating an entire room, Wi-Fi signals can’t get in and, crucially, can’t get out.”

Step 7. Upgrade your Router’s firmware

You should check the manufacturer’s site occasionally to make sure that your router is running the latest firmware. You can find the existing firmware version of your router using from the router’s dashboard at 192.168.*.

Connect to your Secure Wireless Network

To conclude, MAC Address filtering with WPA2 (AES) encryption (and a really complex passphrase) is probably the best way to secure your wireless network.

Once you have enabled the various security settings in your wireless router, you need to add the new settings to your computers and other wireless devices so that they all can connect to the Wi-Fi network. You can select to have your computer automatically connect to this network, so you won’t have to enter the SSID, passphrase and other information every time you connect to the Internet.
Reply
#8

Maybe if you autists read the OP, it stated he already reset his router
Reply
#9

Quote:
Originally Posted by gtagamer16
Посмотреть сообщение
[...]
Did you just fucking copy everything from this article instead of linking?
Reply
#10

Two things..

Secure your wifi with wpa2 aes with strong password, do NOT use wep. It can be hacked in ten minutes or less.

Is there some ethernet devices in LAN connected to the router? Xbox, mediacenter or something downloading?
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)