[norton2]

Код HTML:

E@_R[GetPlayerVehicleID(playerid)] = floatround(Veh[r][KM], floatround_round);
printf("FLOATR: %s", floatround(Veh[r][KM], floatround_round));// DEBUG

DEBUG .LOG:

Код HTML:

FLOATR: 2.312

-----------------
Veh[r][KM] is 0.751, not 2.312.

[OllieSimons]

You are trying to print a string, use %d for integers.

printf("FLOATR: %d", floatround(Veh[r][KM], floatround_round));

[Sellize]

Quote:

Originally Posted by OllieSimons You are trying to print a string, use %d for integers. printf("FLOATR: %d", floatround(Veh[r][KM], floatround_round));

Or %i.

[Stanford]

The point of floatrounds at your case to turn the values that you have as a float into an integer, so as the mates said earlier, use %d or %i (both for integers) instead of %s (which is for string).

[norton2]

OK.

Код HTML:

E@_R[Veh[r][ServerID]] = floatround(Veh[r][KM], floatround_round);
        printf("FLOATR: %d", floatround(Veh[r][KM], floatround_round));// DEBUG

DEBUG .LOG:

Код HTML:

FLOATR: 1

------------
Veh[r][KM] is 0.751, not 1.
Normal should be: 0751.

[CalvinC]

Floatround rounds the number to the nearest whole number.
Which will make 0.751 = 1.

If you want to display 0.751 there's no need to use floatround at all.
If you remove floatround and use %f instead of %d it will display 0.751 correctly.

[Crayder]

Quote:

Originally Posted by norton2 OK. Код HTML: E@_R[Veh[r][ServerID]] = floatround(Veh[r][KM], floatround_round); printf("FLOATR: %d", floatround(Veh[r][KM], floatround_round));// DEBUG DEBUG .LOG: Код HTML: FLOATR: 1 ------------ Veh[r][KM] is 0.751, not 1. Normal should be: 0751.

0.751 rounded is in fact 1.
If you want it to be 751 then you need to do it like this:

Код:

E@_R[Veh[r][ServerID]] = floatround(Veh[r][KM] * 1000.0, floatround_round);
        printf("FLOATR: %d", E@_R[Veh[r][ServerID]]);// DEBUG

Though, I don't think the car is going to be going 751 km/h. You probably (depending on your task) need to multiply it by 100.0 instead.

[norton2]

Crayder, Thank you very much!! +1