18.03.2010, 12:30
Now, that's really a bad way of how to port-forward.
In "Local IP address" you need to put your local address, to find that out do:
Start>Run>(type in)cmd>ipconfig /all - you will get something like this:
Now the "IP Address: ............." you got in the command prompt is your local ip address
and you type that in the Gigaset SE361 Port Forwarding page under "Local IP Address"!
Hopefully you understand it now, and it works, also put the "Protocol" to TCP/UDP.
In "Local IP address" you need to put your local address, to find that out do:
Start>Run>(type in)cmd>ipconfig /all - you will get something like this:
Код:
Ethernet adapter Local Area Connection: Connection-specific DNS suffix: ........ Description: ... Physical address: ... Dhcp enabled: ... Autoconfiguration enabled: ... IP Address :
and you type that in the Gigaset SE361 Port Forwarding page under "Local IP Address"!
Hopefully you understand it now, and it works, also put the "Protocol" to TCP/UDP.