09.08.2014, 16:53
Quote:
Why do you want to attach object to object? Why should i use this?
|
pawn Код:
AttachObjectToPoint(Float:pos[3], Float:rot[3], Float:off_x, Float:off_y, Float:off_z, Float:rot_x, Float:rot_y, Float:rot_z, &Float:X, &Float:Y, &Float:Z, &Float:RX, &Float:RY, &Float:RZ) // By Stylock - http://forum.sa-mp.com/member.php?u=114165
{
static
Float:sin[3],
Float:cos[3],
EDIT_FloatEulerFix(rot[0], rot[1], rot[2]);
cos[0] = floatcos(rot[0], degrees); cos[1] = floatcos(rot[1], degrees); cos[2] = floatcos(rot[2], degrees); sin[0] = floatsin(rot[0], degrees); sin[1] = floatsin(rot[1], degrees); sin[2] = floatsin(rot[2], degrees);
pos[0] = pos[0] + off_x * cos[1] * cos[2] - off_x * sin[0] * sin[1] * sin[2] - off_y * cos[0] * sin[2] + off_z * sin[1] * cos[2] + off_z * sin[0] * cos[1] * sin[2];
pos[1] = pos[1] + off_x * cos[1] * sin[2] + off_x * sin[0] * sin[1] * cos[2] + off_y * cos[0] * cos[2] + off_z * sin[1] * sin[2] - off_z * sin[0] * cos[1] * cos[2];
pos[2] = pos[2] - off_x * cos[0] * sin[1] + off_y * sin[0] + off_z * cos[0] * cos[1];
rot[0] = asin(cos[0] * cos[1]); rot[1] = atan2(sin[0], cos[0] * sin[1]) + rot_z; rot[2] = atan2(cos[1] * cos[2] * sin[0] - sin[1] * sin[2], cos[2] * sin[1] - cos[1] * sin[0] * -sin[2]);
cos[0] = floatcos(rot[0], degrees); cos[1] = floatcos(rot[1], degrees); cos[2] = floatcos(rot[2], degrees); sin[0] = floatsin(rot[0], degrees); sin[1] = floatsin(rot[1], degrees); sin[2] = floatsin(rot[2], degrees);
rot[0] = asin(cos[0] * sin[1]); rot[1] = atan2(cos[0] * cos[1], sin[0]); rot[2] = atan2(cos[2] * sin[0] * sin[1] - cos[1] * sin[2], cos[1] * cos[2] + sin[0] * sin[1] * sin[2]);
cos[0] = floatcos(rot[0], degrees); cos[1] = floatcos(rot[1], degrees); cos[2] = floatcos(rot[2], degrees); sin[0] = floatsin(rot[0], degrees); sin[1] = floatsin(rot[1], degrees); sin[2] = floatsin(rot[2], degrees);
rot[0] = atan2(sin[0], cos[0] * cos[1]) + rot_x; rot[1] = asin(cos[0] * sin[1]); rot[2] = atan2(cos[2] * sin[0] * sin[1] + cos[1] * sin[2], cos[1] * cos[2] - sin[0] * sin[1] * sin[2]);
cos[0] = floatcos(rot[0], degrees); cos[1] = floatcos(rot[1], degrees); cos[2] = floatcos(rot[2], degrees); sin[0] = floatsin(rot[0], degrees); sin[1] = floatsin(rot[1], degrees); sin[2] = floatsin(rot[2], degrees);
rot[0] = asin(cos[1] * sin[0]); rot[1] = atan2(sin[1], cos[0] * cos[1]) + rot_y; rot[2] = atan2(cos[0] * sin[2] - cos[2] * sin[0] * sin[1], cos[0] * cos[2] + sin[0] * sin[1] * sin[2]);
X = pos[0];
Y = pos[1];
Z = pos[2];
RX = rot[0];
RY = rot[1];
RZ = rot[2];
}