[phil_lendon]

I have two gates

pawn Код:

new impoundgate1;
new impoundgate2;
impoundgate1 = CreateDynamicObject(3049, 1901.51, -1865.99, 14.65,   0.00, 0.00, 0.00); //gate1
impoundgate2 = CreateDynamicObject(3050, 1892.43, -1865.98, 14.65,   0.00, 0.00, 180.00); //gate2

and I have the commands to open/close

pawn Код:

if(!strcmp(cmdtext, "/open", true)){ 
            MoveObject(impoundgate1, 1901.51, -1865.99, 14.65, 0.00, 0.00, 274.66); 
            MoveObject(impoundgate2, 1892.43, -1865.98, 14.65,   0.00, 0.00, 266.03); 
            SendClientMessage(playerid, 0x0000BBAA, "Impound Opened"); 
            return 1; 
        } 
        if(!strcmp(cmdtext, "/close", true)){ 
            MoveObject(impoundgate1, 1901.51, -1865.99, 14.65,   0.00, 0.00, 0.00); 
            MoveObject(impoundgate2, 1892.43, -1865.98, 14.65,   0.00, 0.00, 180.00); 
            SendClientMessage(playerid, 0xAA3333AA, "Impound Closed"); 
            return 1; 
        } 
  return 1; 
}  
}

The coords are right.. I think.. /open changes the coords so the doors are open and sideways making space and /close sets them shut.. I do it ic and get the message impound open/closed but doesnt do anythinh?

[XtremeR]

this will work:

pawn Код:

if(!strcmp(cmdtext, "/open", true)){ 
            MoveDynamicObject(impoundgate1, 1901.51, -1865.99, 14.65, 2.0); 
            MoveDynamicObject(impoundgate2, 1892.43, -1865.98, 14.65,  2.0); 
            SendClientMessage(playerid, 0x0000BBAA, "Impound Opened"); 
            return 1; 
        } 
        if(!strcmp(cmdtext, "/close", true)){ 
            MoveDynamicObject(impoundgate1, 1901.51, -1865.99, 14.65,   2.0); 
            MoveDynamicObject(impoundgate2, 1892.43, -1865.98, 14.65,   2.0); 
            SendClientMessage(playerid, 0xAA3333AA, "Impound Closed"); 
            return 1; 
        } 
  return 1; 
}  
}