[TheBestInTheWorld028]

why does this happen? i changed the port. still, nothing!
help me fix it?

[RyanDam]

You already uses the port to something else.

Go down to the "Windows" button and enter the search field and write /cmd, up comes a box like this one. Then you do /ipconfig - Diffrent IPs are comming up, I think you shall use the IPV adress. Then go into the server.cfg and change the IP adress to the chosen one in your command prompt.

If you need more help, you can just add my skype: fredtoft1

I hope it helped.

[Mark™]

Port range of 1 - 1024 are in use by the system, rest are free to be used for any other purposes.

[M3mPHi$_S3]

you can use 7777 in place of 1818 becouse " 1818 " is not an valid port goto server.cfg and change

Код:

port 1818

to this

Код:

7777

then try again !!!!

[Majed]

You can use any port above 5555 I guess.
Change in server.cfg the port and when you portforward type also the port.
If you don't want 7777 try from 5555 above.

Код:

maxplayers 50
port 8585

That's for me.

[Mark™]

Quote:

Originally Posted by мυ∂υℓ_вacнα becouse " 1818 " is not an valid port

Ofcourse its valid, however its in use, in this case. For sa-mp servers port range of 1-65535 are all valid ports.

[Silentfood]

Make sure you're not binding to an IP you do not own. It's best to not bind to an IP address, unless you know for sure you have that directed to the server at all times.

Dynamic IP addresses will not work if you're trying to bind to one, you must have a static IP address if you're home hosting.

[$HANI_DON]

i know this thing i can help u that 100% work

Goto Control panel>>>Windows Firewall>>>Advanced Settings(on left side)>>>Inbound Rules
In the inbound rule click NEW RULE(on right)

Then click on port>>> then 'TCP' and 'All local Ports' then ' Allow the connection'
After this there will be 3 options of when does this rule apply TICK ALL THREE
after this Type name as "MY SAMP SERVER" click finish

After this do these STEPS (on ABOVE 3 LINES) with UDP..

THIS WILL HELP YOU 100%



IF THIS HELPS +REP ME.

[Majed]

Quote:

Originally Posted by $HANI_DON i know this thing i can help u that 100% work Goto Control panel>>>Windows Firewall>>>Advanced Settings(on left side)>>>Inbound Rules In the inbound rule click NEW RULE(on right) Then click on port>>> then 'TCP' and 'All local Ports' then ' Allow the connection' After this there will be 3 options of when does this rule apply TICK ALL THREE after this Type name as "MY SAMP SERVER" click finish After this do these STEPS (on ABOVE 3 LINES) with UDP.. THIS WILL HELP YOU 100% IF THIS HELPS +REP ME.

Wtf? He didn't have problem with FireWall, He had problem with IP+port.
Just what he needs is to change IP ._.!

[TheBestInTheWorld028]

thanks for the +rep. XD