[Map] Ganton Projects
#1

A project compex I made, I got bored so...Not the best work anyone could do, I was just messing around with my mapping app again, as I've been distant from it. Just something I threw together so..Don't make fun of me .







Код:
RemoveBuildingForPlayer(playerid, 3662, 2142.7031, -1657.9297, 17.5547, 0.25);
RemoveBuildingForPlayer(playerid, 3662, 2164.9375, -1666.3047, 17.5547, 0.25);
RemoveBuildingForPlayer(playerid, 3662, 2141.8672, -1693.3516, 17.5547, 0.25);
RemoveBuildingForPlayer(playerid, 3662, 2154.3516, -1713.6641, 17.4844, 0.25);
RemoveBuildingForPlayer(playerid, 5633, 2089.3594, -1643.9297, 18.2188, 0.25);
RemoveBuildingForPlayer(playerid, 1501, 2138.3438, -1697.1094, 14.0703, 0.25);
RemoveBuildingForPlayer(playerid, 3661, 2141.8672, -1693.3516, 17.5547, 0.25);
RemoveBuildingForPlayer(playerid, 3661, 2154.3516, -1713.6641, 17.4844, 0.25);
RemoveBuildingForPlayer(playerid, 620, 2169.9453, -1689.4766, 12.5703, 0.25);
RemoveBuildingForPlayer(playerid, 3661, 2142.7031, -1657.9297, 17.5547, 0.25);
RemoveBuildingForPlayer(playerid, 1501, 2142.8594, -1663.0859, 14.0703, 0.25);
RemoveBuildingForPlayer(playerid, 1501, 2165.1094, -1671.4531, 14.0703, 0.25);
RemoveBuildingForPlayer(playerid, 3661, 2164.9375, -1666.3047, 17.5547, 0.25);
RemoveBuildingForPlayer(playerid, 1412, 2178.8828, -1676.6875, 14.2344, 0.25);
CreateObject(12940, 2149.22, -1706.57, 17.85,   0.00, 0.00, 87.12);
CreateObject(12940, 2152.95, -1671.74, 17.75,   0.00, 0.00, -91.86);
CreateObject(1217, 2152.29, -1686.10, 14.50,   0.00, 0.00, -0.42);
CreateObject(1217, 2151.31, -1686.82, 14.48,   0.00, 0.00, 0.00);
CreateObject(1217, 2152.38, -1687.35, 14.48,   0.00, 0.00, 0.00);
CreateObject(1442, 2151.41, -1672.92, 14.60,   0.00, 0.00, 0.00);
CreateObject(1442, 2152.42, -1673.33, 14.58,   0.00, 0.00, 0.00);
CreateObject(1412, 2183.12, -1657.65, 15.12,   356.86, 0.00, -1.35);
CreateObject(1412, 2183.12, -1657.65, 15.12,   356.86, 0.00, -1.35);
CreateObject(14497, 2172.76, -1656.00, 14.17,   0.00, 0.00, -111.60);
CreateObject(1415, 2146.27, -1651.77, 14.08,   0.00, 0.00, 114.84);
CreateObject(1415, 2146.21, -1648.95, 14.08,   0.00, 0.00, 64.08);
CreateObject(1415, 2147.46, -1646.20, 14.08,   0.00, 0.00, 81.78);
Reply
#2

The couches look sorta fucked up... But the rest of it seems fine. 5/10?
Reply
#3

Thanks, I made the couches like that on purpose. When you see couches outside, they usually don't have legs on them.
Reply
#4

Not bad 5/10
Reply
#5

Eh. If you see couches outside, they don't normally have legs? So, if the couch is inside they have legs but when outside they magically disappear?
Reply
#6

Quote:
Originally Posted by Luis-
Посмотреть сообщение
Eh. If you see couches outside, they don't normally have legs? So, if the couch is inside they have legs but when outside they magically disappear?
lmao
Reply
#7

0 / 100 this is fucked up
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)