[Map] Angel Pine Center Square
#1

Hey Guys

I have released a second map today and this one is once again in Angel Pine. I have removed several buildings and replaced it with a type of main square.



Код:
RemoveBuildingForPlayer(playerid, 18527, -2100.2188, -2285.5000, 33.1875, 0.25);
RemoveBuildingForPlayer(playerid, 18214, -2160.0625, -2308.6250, 41.1250, 0.25);
RemoveBuildingForPlayer(playerid, 18200, -2100.2188, -2285.5000, 33.1875, 0.25);
CreateObject(19377, -2095.29, -2291.44, 29.57,   0.00, 90.00, 51.50);
CreateObject(19377, -2102.73, -2285.53, 29.57,   0.00, 90.00, 51.50);
CreateObject(19377, -2107.59, -2281.71, 29.57,   0.00, 90.00, 51.50);
CreateObject(19377, -2114.00, -2289.77, 29.57,   0.00, 90.00, 51.50);
CreateObject(19377, -2106.48, -2295.79, 29.57,   0.00, 90.00, 51.50);
CreateObject(19377, -2101.90, -2299.63, 29.57,   0.00, 90.00, 51.50);
CreateObject(19377, -2108.40, -2307.69, 29.57,   0.00, 90.00, 51.50);
CreateObject(19377, -2115.73, -2301.61, 29.57,   0.00, 90.00, 51.50);
CreateObject(19377, -2120.48, -2297.87, 29.57,   0.00, 90.00, 51.50);
CreateObject(19377, -2126.89, -2305.93, 29.57,   0.00, 90.00, 51.50);
CreateObject(19377, -2119.72, -2311.75, 29.57,   0.00, 90.00, 51.50);
CreateObject(19377, -2114.78, -2315.85, 29.57,   0.00, 90.00, 51.50);
CreateObject(19377, -2120.12, -2322.52, 29.57,   0.00, 90.00, 51.50);
CreateObject(19377, -2127.29, -2316.75, 29.57,   0.00, 90.00, 51.50);
CreateObject(19377, -2132.40, -2312.93, 29.57,   0.00, 90.00, 51.50);
CreateObject(9114, -2115.67, -2302.98, 36.42,   0.00, 0.00, -40.00);
CreateObject(1232, -2105.03, -2302.71, 32.29,   0.00, 0.00, 0.00);
CreateObject(1232, -2111.90, -2296.69, 32.29,   0.00, 0.00, 0.00);
CreateObject(1571, -2091.32, -2290.41, 30.99,   0.00, 0.00, 138.21);
CreateObject(1571, -2106.92, -2277.87, 30.99,   0.00, 0.00, 138.21);
CreateObject(1597, -2113.16, -2319.14, 32.22,   0.00, 0.00, 141.99);
CreateObject(1597, -2098.05, -2300.06, 32.22,   0.00, 0.00, 141.99);
CreateObject(1597, -2115.53, -2285.96, 32.22,   0.00, 0.00, 141.99);
CreateObject(1597, -2130.74, -2305.93, 32.22,   0.00, 0.00, 141.99);
CreateObject(823, -2098.83, -2285.72, 31.86,   0.00, 0.00, 0.00);
CreateObject(823, -2099.66, -2284.87, 31.86,   0.00, 0.00, 0.00);
CreateObject(823, -2100.85, -2283.68, 31.86,   0.00, 0.00, 0.00);
CreateObject(823, -2101.95, -2282.66, 31.86,   0.00, 0.00, 0.00);
CreateObject(869, -2119.77, -2304.64, 30.14,   0.00, 0.00, 0.00);
CreateObject(869, -2121.12, -2303.46, 30.14,   0.00, 0.00, 0.00);
CreateObject(869, -2121.31, -2306.20, 30.14,   0.00, 0.00, 0.00);
CreateObject(869, -2122.80, -2304.63, 30.14,   0.00, 0.00, 0.00);
CreateObject(869, -2122.91, -2301.76, 30.14,   0.00, 0.00, 0.00);
CreateObject(869, -2124.27, -2303.16, 30.14,   0.00, 0.00, 0.00);
CreateObject(1364, -2133.52, -2315.43, 30.15,   0.00, 0.00, 49.76);
CreateObject(1364, -2130.78, -2312.36, 30.15,   0.00, 0.00, 49.76);
CreateObject(1364, -2126.78, -2320.32, 30.15,   0.00, 0.00, 49.76);
CreateObject(1364, -2124.14, -2317.12, 30.15,   0.00, 0.00, 49.76);
CreateObject(1364, -2127.97, -2319.32, 30.15,   0.00, 0.00, 230.27);
CreateObject(1364, -2125.34, -2316.18, 30.15,   0.00, 0.00, 230.27);
CreateObject(1364, -2119.81, -2320.60, 30.15,   0.00, 0.00, 230.27);
CreateObject(1364, -2122.49, -2323.68, 30.15,   0.00, 0.00, 230.27);
Enjoy again
Reply
#2

Looks Good. Do you mind if i use it.
Reply
#3

Go ahead.
Reply
#4

Nice Map
Reply
#5

Thanks.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)