Posts: 41
Threads: 14
Joined: Jan 2012
Reputation:
0
Local Area Network
IP: 192.168.0.102
whatismyip.com
IP: 109.237.15.47
When I add 192.168.0.102 in SA-MP it works but none sees it, only me.
When I add 109.237.15.47 cannot start the server, reason: Unable to start server on 109.237.15.47:7777. Port in use?
I've checked every single proccess, this port is free, so it's not in use.
Posts: 139
Threads: 7
Joined: Jun 2012
Reputation:
0
Has the port been forwarded?
Posts: 41
Threads: 14
Joined: Jan 2012
Reputation:
0
I'm unable to start the server on the public IP
Posts: 117
Threads: 8
Joined: Jul 2008
Reputation:
0
You can't bind your external IP address to the sa-mp server, its not registered to any interfaces on your computer. Your router uses overloaded NAT (PAT) to make multiple LAN connections across one WAN connection.
You need to bind your server to your local IP (which it will do automatically), and then configure your router to forward traffic to 192.168.0.102 on UDP port 7777. There are plenty of port forwarding guides out there, but you cannot use the bind directive in the server config in that way.
Posts: 41
Threads: 14
Joined: Jan 2012
Reputation:
0
You really told me a lot -.-'
I just have wireless router, well, fuck it, don't knowЁ!
Posts: 2,698
Threads: 37
Joined: Mar 2012
Reputation:
0
Portforward.
If you have money host your server.
volt-host.com
Posts: 68
Threads: 10
Joined: Jun 2012
Reputation:
0
Yes! For hosting a sa-mp server you need to pay on ( volt-host.com ) It will cost 25$ For 100 slots and it will be hosted, when you pay they will provide you IP ADRESS : PORT.
anyway :P 
