[Oveus]

How do I portforward 7777 with Allied Data CopperJet-1616-2P?

I have tried this:
http://portforward.com/english/route...2P/default.htm

But I can't get it to work.

[mprofitt]

Did you use the IP address of the PC your server is on in the IP Addresses Internal box? Transport TCP? Internal / External port range, all should be 7777 or whatever port you are using.

[Oveus]

Quote:

Originally Posted by mprofitt Did you use the IP address of the PC your server is on in the IP Addresses Internal box?

No I entered 172.19.3.1, if I enter my IP it gives this error:

Quote:

webserver: changes not effected: failed to recover checkpoint with id 87

Quote:

Originally Posted by mprofitt Internal / External port range, all should be 7777 or whatever port you are using.

They are.

[mprofitt]

Is 172.19.3.1 the address of you PC? If so, that has to be entered. Check the interface address of you PC.

<INTERNET ADDRESS>:7777 is what others connect to. Your router translates the, using <NAT to YOUR PC>:7777

Make sure the communication protocol is TCP as well.

Quote:

Originally Posted by Oveus No I entered 172.19.3.1, if I enter my IP it gives this error: They are.

[Oveus]

Still no luck. Anyone else got solutions?

[RoBo]

Quote:

Originally Posted by Oveus Still no luck. Anyone else got solutions?

Yeah. Don't listen to the person above, SA:MP only uses UDP, forwarding a TCP port is a waste of time.

[Oveus]

Quote:

Originally Posted by RoBo Yeah. Don't listen to the person above, SA:MP only uses UDP, forwarding a TCP port is a waste of time.

Tried that too, still (Retrieving info...)

[Smokey619]

you need to login in into your router for example most linksys are 192.168.1.1 then it then just go to portforward and enter your ip and then some other thing of security to let people connect to your internet

EDIT: here is some pics i took if you got a linksys router this is all you need to portforward it


By smokey619 at 2010-07-09


By smokey619 at 2010-07-09

[Mr187]

Quote:

Originally Posted by Smokey619 you need to login in into your router for example most linksys are 192.168.1.1 then it then just go to portforward and enter your ip and then some other thing of security to let people connect to your internet EDIT: here is some pics i took if you got a linksys router this is all you need to portforward it

1. Wrong Router his is different.
2. You need to portforward your lan IP, example 192.168.0.102