01.04.2016, 01:52
(
Последний раз редактировалось zT KiNgKoNg; 02.04.2016 в 02:39.
)
Frankly, I cannot tell you what the hell is going one... I do how-ever know that its usually caused by something using #emit - and thankfully I only have one function that uses this, that I created any-how....
Edit: Commands work correctly when not spawned, but when spawned the issue stated below still happens.
Edit Two: The issue was not caused by any of the systems located below, how-ever it was caused by Y_Timers.
Edit Thee: Narrowed it down to Zeex's Compiler Patches or YSI 3.1/4 (Maybe both)
Error:
OnPlayerCommandText
Function Using #emit
Addition: I'm also getting this (stated below) after adding Y_Timers
Edit: Commands work correctly when not spawned, but when spawned the issue stated below still happens.
Edit Two: The issue was not caused by any of the systems located below, how-ever it was caused by Y_Timers.
Edit Thee: Narrowed it down to Zeex's Compiler Patches or YSI 3.1/4 (Maybe both)
Error:
Код:
[debug] Run time error 20: "Invalid index parameter (bad entry point)" [debug] Run time error 7: "Stack underflow" [debug] Stack pointer (STK) is 0x108AF6C, stack top (STP) is 0x108AF68 [debug] AMX backtrace: [debug] #0 ???????? in public OnPlayerCommandText ()
pawn Код:
public OnPlayerCommandText(playerid, cmdtext[])
{
new Command[30],
command_params[127],
command_function[64],
result = 1;
sscanf(cmdtext, "s[30]s[127]", Command, command_params);
for(new i, j = strlen(Command); i < j; i ++)
Command[i] = tolower(Command[i]);
format(command_function, 64, "cmd_%s", Command[1]);
/*
cmd_%1
scmd_%1_%2
mcmd_%1_%2
*/
if(funcidx(command_function) == -1) // If a regular command doesn't exist, look for a helper command;
{
new iStaffLevel = 1,
iModeratorLevel = 1,
iLoop = 9;
while(iLoop > 0)
{
format(command_function, 64, "scmd_%s_%d", Command[1], iLoop);
if(funcidx(command_function) != -1)
break;
iLoop --;
}
if(iLoop == 0)
{
iLoop = 5;
while(iLoop > 0)
{
format(command_function, 64, "mcmd_%s_%d" , Command[1], iLoop);
if(funcidx(command_function) != -1)
break;
iLoop --;
}
}
if(iLoop == 0)
result = 0;
if(iModeratorLevel < iLoop || iStaffLevel < iLoop)
result = 5;
}
if(result == 1)
{
if(isnull(command_params))result = CallLocalFunction(command_function, "is", playerid, "\1");
else result = CallLocalFunction(command_function, "is", playerid, command_params);
}
if(0 < result < 7)
printf("[COMMAND] [%d]: %s", playerid, cmdtext);
switch(result)
{
case 0: SendClientMessageA(playerid, COLOR_ORANGE, "That is not a recognized command, please check the /help dialog...");
case 1: return 1; // Command was found do fuck-all.
case 2: SendClientMessageA(playerid, COLOR_GRAY, "You are unable to use that command right now.");
case 3: SendClientMessageA(playerid, COLOR_GRAY, "You cannot use that command on the specified player right now.");
case 4: SendClientMessageA(playerid, COLOR_GRAY, "Invalid ID Specified.");
case 5: SendClientMessageA(playerid, COLOR_GRAY, "You have insufficient authority to use that command.");
case 6: SendClientMessageA(playerid, COLOR_GRAY, "You can only use that command on {FF6347}Staff Duty{808080} or {008B8B}Moderator Duty{808080}.");
}
return true;
}
pawn Код:
stock WriteLog(directory[], file[], fstring[], log_level = LOG_LEVEL_GEN, {Float,_}:...)
{
static const STATIC_ARGS = 5;
new fstringm[1024];
new n = (numargs() - STATIC_ARGS) * BYTES_PER_CELL;
new fyear, fmonth, fday,
fhour, fminute, fsecond;
new File:log_file,
filename[144],
log_level_string[24];
getdate(fyear, fmonth, fday);
gettime(fhour, fminute, fsecond);
format(filename, sizeof(filename), SERVER_DIRECTORY_LOGS"%s/%s%s", directory, file, SERVER_DIRECTORY_LOGS_FILE);
if(!file_exists(filename))
{
file_create(filename);
log_file = f_open(filename);
new string[1487];
format(string,sizeof(string), "File Creation Date: [%02d/%02d/%04d %02d:%02d:%02d]", fday, fmonth, fyear, fhour, fminute, fsecond);
file_write(filename, string);
f_close(log_file);
}
log_file = f_open(filename);
switch(log_level)
{
case LOG_LEVEL_GEN: format(log_level_string, sizeof(log_level_string), "GENERAL");
case LOG_LEVEL_INFO: format(log_level_string, sizeof(log_level_string), "INFO");
case LOG_LEVEL_WARN: format(log_level_string, sizeof(log_level_string), "WARNING");
case LOG_LEVEL_ERROR: format(log_level_string, sizeof(log_level_string), "ERROR");
}
if(n)
{
new arg_start,arg_end;
#emit CONST.alt fstring
#emit LCTRL 5
#emit ADD
#emit STOR.S.pri arg_start
#emit LOAD.S.alt n
#emit ADD
#emit STOR.S.pri arg_end
do
{
#emit LOAD.I
#emit PUSH.pri
arg_end -= BYTES_PER_CELL;
#emit LOAD.S.pri arg_end
}
while(arg_end > arg_start);
#emit PUSH.S fstring
#emit PUSH.C 1024
#emit PUSH.ADR fstringm
n += BYTES_PER_CELL * 3;
#emit PUSH.S n
#emit SYSREQ.C format
n += BYTES_PER_CELL;
#emit LCTRL 4
#emit LOAD.S.alt n
#emit ADD
#emit SCTRL 4
if(log_file)
{
new string[1487];
format(string,sizeof(string), "\n[%02d/%02d/%04d %02d:%02d:%02d][%s]: %s",fday, fmonth, fyear, fhour, fminute, fsecond, log_level_string, fstringm);
file_write(filename, string);
} else print("[ERROR]: Failed to open the file requested...");
} else {
if(log_file)
{
new string[1487];
format(string,sizeof(string), "\n[%02d/%02d/%04d %02d:%02d:%02d][%s]: %s",fday, fmonth, fyear, fhour, fminute, fsecond, log_level_string, fstring);
file_write(filename, string);
} else print("[ERROR]: Failed to open the file requested...");
}
f_close(log_file);
}
Addition: I'm also getting this (stated below) after adding Y_Timers
pawn Код:
//CONNECT
[debug] Run time error 7: "Stack underflow"
[debug] Stack pointer (STK) is 0x108AF70, stack top (STP) is 0x108AF68
[debug] AMX backtrace:
[debug] #0 ???????? in public OnPlayerConnect ()
//DISCONNECT
[debug] Run time error 7: "Stack underflow"
[debug] Stack pointer (STK) is 0x1080224, stack top (STP) is 0x1080220
[debug] AMX backtrace:
[debug] #0 ???????? in public OnPlayerDisconnect ()
// ON ATTEMPT SPAWN
[debug] Run time error 20: "Invalid index parameter (bad entry point)"
[debug] Run time error 20: "Invalid index parameter (bad entry point)"
[debug] Run time error 20: "Invalid index parameter (bad entry point)"
[debug] Run time error 20: "Invalid index parameter (bad entry point)"
[debug] Run time error 20: "Invalid index parameter (bad entry point)"
[debug] Run time error 20: "Invalid index parameter (bad entry point)"
[debug] Run time error 20: "Invalid index parameter (bad entry point)"
[debug] Run time error 20: "Invalid index parameter (bad entry point)"
[debug] Run time error 20: "Invalid index parameter (bad entry point)"
[debug] Run time error 20: "Invalid index parameter (bad entry point)"
[debug] Run time error 20: "Invalid index parameter (bad entry point)"
[debug] Run time error 20: "Invalid index parameter (bad entry point)"
[debug] Run time error 20: "Invalid index parameter (bad entry point)"
[debug] Run time error 20: "Invalid index parameter (bad entry point)"
[debug] Run time error 20: "Invalid index parameter (bad entry point)"
[debug] Run time error 20: "Invalid index parameter (bad entry point)"
[debug] Run time error 20: "Invalid index parameter (bad entry point)"
[debug] Run time error 20: "Invalid index parameter (bad entry point)"