[Ghazal]

Hello there,

I have got good SPECS,



And still I am just getting 30-88 FPS.

Well my sa-mp.txt In GTA San Andres Documents.

Код:

fpslimit=1337
multicore=2
audioproxyoff=0
disableheadmove=1
nonametagstatus=0

I have no idea why I am getting Low FPS.

I don't have such mods, Just a weapon pack,weapon sound mod and a hud mod.

[Jaay]

Try and put your fpslimit to 90 which is the highest SA-MP will use, 1337 will not make it any better, If not just worse. Also Check how many cores you have and then after you have found out change "multicore" to the about of cores you have. It will when use them for running samp which will increase your FPS.

[Ghazal]

Quote:

Originally Posted by Jaay Try and put your fpslimit to 90 which is the highest SA-MP will use, 1337 will not make it any better, If not just worse. Also Check how many cores you have and then after you have found out change "multicore" to the about of cores you have. It will when use them for running samp which will increase your FPS.

I have 2 cores, But if i set the fpslimit to 90 that will be the max? :3

[Khanz]

7650M is not best and it should not run gta at 100FPS.

[Dangjai]

use this code

Код:

fpslimit=48
multicore=1
audioproxyoff=0
timestamp=1
pagesize=20

[Jaay]

Quote:

Originally Posted by Maro06 I have 2 cores, But if i set the fpslimit to 90 that will be the max? :3

You say you have to cores so just change these two settings,
Change it to:

Код:

fpslimit=90
multicore=2

[Dangjai]

Quote:

Originally Posted by Jaay You say you have to cores so just change these two settings, Change it to: Код: fpslimit=90 multicore=2

STOP BUMPING OLD TOPICS NOOB

[Ayham]

Quote:

Originally Posted by Kinglee STOP BUMPING OLD TOPICS NOOB

he is bumping that thread or you? huh?

don't be so rude toward players.

[DuelZ]

Quote:

Originally Posted by Jaay You say you have to cores so just change these two settings, Change it to: Код: fpslimit=90 multicore=2

You don't enter the amount of cores you have in there.

It has only two options:

0 = Don't use Multiple CPU Cores.
1 = Use Multiple CPU Cores.

wiki.sa-mp.com/wiki/Sa-mp.cfg

[Guest4390857394857]

Quote:

Originally Posted by DuelZ You don't enter the amount of cores you have in there. It has only two options: 0 = Don't use Multiple CPU Cores. 1 = Use Multiple CPU Cores. wiki.sa-mp.com/wiki/Sa-mp.cfg

What is the default option?