05.11.2012, 01:03
How To Setting Modem To Portforward / router
How To Setting Modem To Portforward / Router
05.11.2012, 10:09
Step 1:
On your keyboard press Windows button + R
Now you should see this pop up name "Run", in that popup type in "cmd" withought "" and click ok.
Okay after that there will be a black system screen, what i want you to do in there is type in "ipconfig/all" without "".
Scroll up and find your Default gateway, should be something like 192.168.0.1
Step 2:
Type your Default Gateway into your internet browser
Should look something like this.
You should see the username and password bars.
Now if you do not know your password try "admin" withought "".
If that does not work, maybe your parents put a block or something ask them, and if that wont work, call D-link they will tell you your pw.
Step 3: Ports
Ports are very important this is what it's all about.
Look at this picture
That's what it should look like.
First thing i want you to do is put in names for the first 5 ports, the names don't matter much but just put in your server name to make it easy.
Second is your Ip address now look at your IPv4 ip, and put in same numbers to your ip address, should look something like this
IpAddress
192.168.0.133
After your done that, we move to the ports
Here are the ports i want you to add...
Copy the first 5 ports that are on the screen, DO NOT PAY ATTENTION TO THE REST!!!
After you have done that Save Settings and Reboot your Router.
Step 4: World.properties
Go to world.properties in your source or repack open it, and replace the 127.0.0.1 with your Ip adress.
Get your ip address here
http://ipchicken.com/
Run your .bat files and edit your localhost and your server is 100%
On your keyboard press Windows button + R
Now you should see this pop up name "Run", in that popup type in "cmd" withought "" and click ok.
Okay after that there will be a black system screen, what i want you to do in there is type in "ipconfig/all" without "".
Scroll up and find your Default gateway, should be something like 192.168.0.1
Step 2:
Type your Default Gateway into your internet browser
Should look something like this.
You should see the username and password bars.
Now if you do not know your password try "admin" withought "".
If that does not work, maybe your parents put a block or something ask them, and if that wont work, call D-link they will tell you your pw.
Step 3: Ports
Ports are very important this is what it's all about.
Look at this picture
That's what it should look like.
First thing i want you to do is put in names for the first 5 ports, the names don't matter much but just put in your server name to make it easy.
Second is your Ip address now look at your IPv4 ip, and put in same numbers to your ip address, should look something like this
IpAddress
192.168.0.133
After your done that, we move to the ports
Here are the ports i want you to add...
Copy the first 5 ports that are on the screen, DO NOT PAY ATTENTION TO THE REST!!!
After you have done that Save Settings and Reboot your Router.
Step 4: World.properties
Go to world.properties in your source or repack open it, and replace the 127.0.0.1 with your Ip adress.
Get your ip address here
http://ipchicken.com/
Run your .bat files and edit your localhost and your server is 100%
« Next Oldest | Next Newest »
Users browsing this thread: 1 Guest(s)