[Tutorial] Finished NPC Tutorial.
#1

Well I decided to make finished NPC Tutorial since i had too much trouble
to set it up i want to make it easier for other people to have NPC`s

Ok now we are going to start:
* First we need .rec files they are used to get NPC`s movement
Since this is Finished Tutorial i have here 4 .rec files

*1st is the Train,train will be going around all 3 cities and will be stoping at train stations

*2nd is is on foot this guy will jump over buildings like in that Movie Jamakashi,if u watched that but you can make your own

*3rd is a bus he will be driving around SF and stoping on some stations

*4th is hely(hunter) he will be flying over SF like patroling it could be useful for zombie server like some backup if you configure it a little

These .rec files to go Yourserver>NPCModes>Recordings

I picked SF because its my favourite city and i saw this 4th in server : Zombie Apocalipse.

Ok now after we are done with that we need to set up the scripts that are controling NPC`s, so called "mini" scripts
They are going in YourServer>NPCModes. And copy them to Filterscripts too YourServer>Filterscripts.And make sure you include it in Server.cfg too

Now after that is done we need to make NPC itself i have prepared filterscript and gamemode so you can chose what you want i would recomend GM because FS can conflict sometimes

DONT FORGET TO SET MAX NUMBER OF NPC`S IN SERVER.CFG.

Ok i wont bore you anymore here are the download link
All is included GM,FS,recordings and mini scripts

Train_NPC
Helicopter_NPC
Bus_NPC
On_Foot_NPC

Special thanks to kc for his tutorial and #sa-mp.scripting crew
I learned this from kc`s TUT if you wish to learn too go HERE
Reply
#2

I'll be honest, I don't find it a very good tutorial!
There is allready an npc tutorial wich is perfect for everyone that needs information
Reply
#3

well this is for people who cant set it up or too lame i dont know :/
Reply
#4

Imo, this is basicly nothing, no offense of course, but all you explained was what 4 .rec did...
You didn't explain any NPC Functions, or any example scripts.
Reply
#5

well i didnt needed to i said it was finished lol if people want to learn to do it they can see kc`s tut i posted link on the end
Reply
#6

Something that is allready finished is not a tutorial -.-
Reply
#7

well i can move it from here to some other place
Reply
#8

I am a total noob, and when the tutorial didn't work for me, I downloaded this and took it apart to find out how it worked. This was actually more helpful to me rather than the explanation. Thanks.
Reply
#9

Hi ...
Thanks !
+
Where Should i Put these Files ?
Reply
#10

Ohh ...
I understood !
I should paste the contents in the Folders included at the archive,RIGHT?
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)