[Mythers]

Hi !

This is my first try at using MTA Map editor. I made a Construction site for my first "project".

Here is a few pics:
http://i54.tinypic.com/2m3k085.png
http://i55.tinypic.com/2uzt4xl.jpg

And the map:

CreateObject(1464, 1933.171875, -2096.314453, 13.735429, 0.0000, 0.0000, 0.0000);
CreateObject(1464, 1930.532349, -2096.423096, 13.739942, 0.0000, 0.0000, 0.0000);
CreateObject(1464, 1927.702026, -2096.393555, 13.744779, 0.0000, 0.0000, 0.0000);
CreateObject(1464, 1924.951050, -2096.428955, 13.756240, 0.0000, 0.0000, 0.0000);
CreateObject(1464, 1922.417725, -2096.332764, 13.756294, 0.0000, 0.0000, 0.0000);
CreateObject(1684, 1947.101318, -2093.449951, 14.136908, 0.0000, 0.0000, 180.0000);
CreateObject(944, 1941.328735, -2093.941650, 13.441688, 0.0000, 0.0000, 90.0000);
CreateObject(944, 1941.322876, -2093.910156, 14.639399, 0.0000, 0.0000, 90.0000);
CreateObject(3864, 1939.975586, -2074.273438, 18.645397, 0.0000, 0.0000, 90.0000);
CreateObject(3864, 1946.672729, -2074.458740, 18.648687, 0.0000, 0.0000, 90.0000);
CreateObject(910, 1934.990234, -2089.532227, 13.836890, 0.0000, 0.0000, 90.0000);
CreateObject(910, 1934.968384, -2084.114014, 13.840363, 0.0000, 0.0000, 90.0000);
CreateObject(1412, 1949.275391, -2098.164307, 13.817275, 0.0000, 0.0000, 0.0000);
CreateObject(1412, 1944.057007, -2098.175537, 13.825983, 0.0000, 0.0000, 0.0000);
CreateObject(1412, 1938.907227, -2098.248291, 13.842998, 0.0000, 0.0000, 0.0000);
CreateObject(1412, 1933.675049, -2098.293945, 13.845355, 0.0000, 0.0000, 0.0000);
CreateObject(1412, 1928.507690, -2098.344971, 13.854529, 0.0000, 0.0000, 0.0000);
CreateObject(1412, 1923.610718, -2098.315674, 13.861702, 0.0000, 0.0000, 0.0000);
CreateObject(1412, 1920.911133, -2095.743164, 13.865534, 0.0000, 0.0000, 270.0000);
CreateObject(1412, 1951.974976, -2095.584961, 13.890849, 0.0000, 0.0000, 270.0000);
CreateObject(1412, 1951.612549, -2075.261719, 13.820836, 0.0000, 0.0000, 270.0000);
CreateObject(1412, 1951.629639, -2080.481201, 13.828268, 0.0000, 0.0000, 270.0000);
CreateObject(969, 1952.043579, -2082.758057, 12.721186, 0.0000, 0.0000, 270.0000);
CreateObject(1225, 1934.875000, -2085.588135, 12.976230, 0.0000, 0.0000, 0.0000);
CreateObject(1225, 1935.728882, -2085.376953, 12.977969, 0.0000, 0.0000, 0.0000);
CreateObject(1225, 1935.227661, -2086.322998, 12.978553, 0.0000, 0.0000, 0.0000);
CreateObject(1225, 1936.174927, -2086.092529, 12.969882, 0.0000, 0.0000, 0.0000);
CreateObject(922, 1936.790039, -2094.895020, 13.450199, 0.0000, 0.0000, 0.0000);
CreateObject(1219, 1935.876953, -2092.960205, 12.929141, 0.0000, 0.0000, 0.0000);
CreateObject(1219, 1938.459595, -2092.936523, 12.924897, 0.0000, 0.0000, 0.0000);
CreateObject(1358, 1936.303345, -2081.762451, 13.766645, 0.0000, 0.0000, 0.0000);
CreateObject(1440, 1938.247681, -2092.436768, 13.701999, 0.0000, 0.0000, 0.0000);
CreateObject(1441, 1936.314453, -2093.140137, 13.838775, 0.0000, 0.0000, 168.7500);
CreateObject(1437, 1935.549316, -2079.106689, 13.819899, 0.0000, 0.0000, 90.0000);
CreateObject(3504, 1941.302368, -2091.885986, 13.899307, 0.0000, 0.0000, 0.0000);
CreateObject(1685, 1950.624390, -2078.823486, 13.291010, 0.0000, 0.0000, 0.0000);
CreateObject(1685, 1948.885986, -2078.824951, 13.295179, 0.0000, 0.0000, 0.0000);
CreateObject(1421, 1947.580933, -2078.869629, 13.308777, 0.0000, 0.0000, 270.0000);
CreateObject(1280, 1946.925659, -2090.966797, 12.948689, 0.0000, 0.0000, 270.0000);


So yeah, that's it.

[scripter1]

For your first try, not bad.

[Mythers]

Quote:

Originally Posted by scripter1 For your first try, not bad.

Thanks
Any suggestions ? So i can improve my skill in mapping.

[Hal]

Use a wider variety of objects, not just the main cons. ones.