[diamondo25]

So yea, I've got these CreateObject's from the Map Editor from it's topic, but I got problems with it.
1. All the objects are misplaced and
2. It crashes the client

This is the code

Код:

CreateObject(8357, 643.39, 857.58, 15.68,  0.00, -48.00, 0.00);
CreateObject(8357, 626.79, 903.38, 1.37,  0.00, -33.00, 0.00);
CreateObject(8357, 616.86, 934.69, 15.68,  0.00, -48.00, 34.00);
CreateObject(8357, 621.68, 815.78, 15.68,  0.00, -48.00, -20.00);
CreateObject(8357, 609.01, 825.77, 1.37,  0.00, -33.00, -20.00);
CreateObject(8357, 639.17, 869.61, 1.37,  0.00, -33.00, 34.00);
CreateObject(8357, 637.61, 903.57, 1.37,  0.00, -33.00, 90.00);
CreateObject(8357, 646.15, 919.34, 15.68,  0.00, -48.00, 90.00);
CreateObject(8357, 613.22, 918.71, 1.37,  0.00, -33.00, 130.00);
CreateObject(8357, 602.26, 931.18, 15.68,  0.00, -48.00, 130.00);
CreateObject(8357, 571.72, 871.76, 1.37,  0.00, -33.00, 150.00);
CreateObject(8357, 578.83, 845.93, 1.37,  0.00, -33.00, 180.00);
CreateObject(8357, 635.98, 866.53, 1.37,  0.00, -33.00, -60.00);
CreateObject(8357, 615.35, 840.34, 1.37,  0.00, -33.00, -120.00);
CreateObject(8357, 586.09, 819.97, 15.68,  0.00, -48.00, -60.00);
CreateObject(8357, 610.71, 819.04, 15.68,  0.00, -48.00, -120.00);
CreateObject(8357, 582.67, 923.15, 15.68,  0.00, -48.00, 150.00);
CreateObject(8357, 560.98, 906.45, 15.68,  0.00, -48.00, 180.00);
CreateObject(8357, 546.08, 906.51, 38.03,  0.00, -68.00, 180.00);
CreateObject(8357, 638.28, 832.63, 38.03,  0.00, -68.00, -60.00);
CreateObject(8357, 599.24, 806.87, 38.03,  0.00, -68.00, -120.00);
CreateObject(8357, 646.92, 841.21, 38.03,  0.00, -68.00, -20.00);
CreateObject(8357, 658.45, 857.19, 38.03,  0.00, -68.00, 0.00);
CreateObject(8357, 663.21, 892.51, 38.03,  0.00, -68.00, 34.00);
CreateObject(8357, 632.44, 934.50, 38.03,  0.00, -68.00, 90.00);
CreateObject(8357, 601.51, 950.03, 38.03,  0.00, -68.00, 130.00);
CreateObject(8357, 584.56, 957.40, 38.03,  0.00, -68.00, 150.00);
CreateObject(8357, 337.67, 972.18, 36.12,  41.00, 0.00, 247.00);

Note: I used this code with he YSI object streamer...
I saw that if I switch the Y with X and add 90.0 on the Z value, the object is placed correct.

If anyone knows why this happens, please respond ...

[diamondo25]

Thanks for the response, but that didn't help much (values didn't change, only the function names).

[diamondo25]

Oh, got it working... The ramp was bugged or something...