SA-MP Forums Archive
Multiply problems - Printable Version

+- SA-MP Forums Archive (https://sampforum.blast.hk)
+-- Forum: SA-MP Scripting and Plugins (https://sampforum.blast.hk/forumdisplay.php?fid=8)
+--- Forum: Scripting Help (https://sampforum.blast.hk/forumdisplay.php?fid=12)
+--- Thread: Multiply problems (/showthread.php?tid=503111)


Multiply problems - Lajko1 - 27.03.2014

Why this keep saying a message that I turned engine ON even if my engine is already turned ON ? (it should say that I turned it off...)

pawn Code:
if(strcmp(cmdtext, "/engine", true) == 0) {
        if(!IsPlayerInAnyVehicle(playerid)) return SendClientMessage(playerid, -1,"{FF6A22}INFO: {FFFFFF}You need to be in vehicle to use this command.");
        if(GetPlayerState(playerid) != PLAYER_STATE_DRIVER) return SendClientMessage(playerid, -1,"{FF6A22}INFO: {FFFFFF}You need to be driver to use this command.");
        if(Carinfo[vehicleid][F] < 1) return SendClientMessage(playerid, -1,"{FF6A22}INFO: {FFFFFF}This vehicle is out of fuel.");
        if(ES[playerid] == 1) return SendClientMessage(playerid, -1,"{FF6A22}INFO: {FFFFFF}You are already starting your engine.");
        if(NoFuel(GetPlayerVehicleID(playerid))) return SendClientMessage(playerid, -1,"{FF6A22}INFO: {FFFFFF}You can't do that on this vehicle.");
        if(engine == 1) {
            KillTimer(GasTimer[playerid]);
            SetVehicleParamsEx(vehicleid,0,lights,alarm,doors,bonnet,boot,objective);
            TextDrawHideForPlayer(playerid, vName[playerid]);
            TextDrawHideForPlayer(playerid, vSpeed[playerid]);
            TextDrawHideForPlayer(playerid, vGear[playerid]);
            TextDrawHideForPlayer(playerid, vHP[playerid]);
            TextDrawHideForPlayer(playerid, vFuel[playerid]);
            TextDrawHideForPlayer(playerid, HP[playerid]);
            TextDrawHideForPlayer(playerid, Speed[playerid]);
            TextDrawHideForPlayer(playerid, Gear[playerid]);
            TextDrawHideForPlayer(playerid, Veh[playerid]);
            TextDrawHideForPlayer(playerid, Fuel[playerid]);
            if(Masked[playerid] == 1)
            {
                format(string, sizeof(string), "*Stranger_%d spins the key, turning vehicle engine off.", maskid[playerid]);
                ProxDetector(8.0, playerid, string,0x33CCFFAA,0x33CCFFAA,0x33CCFFAA,0x33CCFFAA,0x33CCFFAA);
                return 1;
            }
            else
            {
                format(string, sizeof(string), "*%s spins the key, turning vehicle engine off.", sendername);
                ProxDetector(8.0, playerid, string,0x33CCFFAA,0x33CCFFAA,0x33CCFFAA,0x33CCFFAA,0x33CCFFAA);
                return 1;
            }
        }
        else if(engine == 0)
        {
            if(Masked[playerid] == 1)
            {
                format(string, sizeof(string), "*Stranger_%d inserts the key in ignition and spins it, turning vehicle engine on.", maskid[playerid]);
                ProxDetector(8.0, playerid, string,0x33CCFFAA,0x33CCFFAA,0x33CCFFAA,0x33CCFFAA,0x33CCFFAA);
                return 1;
            }
            else
            {
                format(string, sizeof(string), "*%s inserts the key in ignition and spins it, turning vehicle engine on", sendername);
                ProxDetector(8.0, playerid, string,0x33CCFFAA,0x33CCFFAA,0x33CCFFAA,0x33CCFFAA,0x33CCFFAA);
            }
            ES[playerid] = 1;
            EngTimer[playerid] = SetTimerEx("EngStart", 4000, false, "d", playerid);
        }
        return 1;
    }
Then next problem is if I write any cmd that does not exist it will say "USAGE: /csg....." above /csg is this cmd:

pawn Code:
if (strcmp("/sb", cmdtext, true, 10) == 0)
    {
        if(SeatBelt[playerid] == 0 && IsPlayerInAnyVehicle(playerid))
        {
            SeatBelt[playerid] = 1;
            
            if(Masked[playerid] == 1)
            {
                format(string, sizeof(string), "*Stranger_%d grabs the seatbelt as he pulls it and adjust it over his body and buckles it up.", maskid[playerid]);
                ProxDetector(8.0, playerid, string,0x33CCFFAA,0x33CCFFAA,0x33CCFFAA,0x33CCFFAA,0x33CCFFAA);
                return 1;
            }
            else
            {
                format(string, sizeof(string), "*%s grabs the seatbelt as he pulls it and adjust it over his body and buckles it up.", sendername);
                ProxDetector(8.0, playerid, string,0x33CCFFAA,0x33CCFFAA,0x33CCFFAA,0x33CCFFAA,0x33CCFFAA);
            }
            return 1;
        }
        else if (SeatBelt[playerid] == 1 && IsPlayerInAnyVehicle(playerid))
        {
            SeatBelt[playerid] = 0;
            
            if(Masked[playerid] == 1)
            {
                format(string, sizeof(string), "*Stranger_%d unbuckles his seatbelt.", maskid[playerid]);
                ProxDetector(8.0, playerid, string,0x33CCFFAA,0x33CCFFAA,0x33CCFFAA,0x33CCFFAA,0x33CCFFAA);
                return 1;
            }
            else
            {
                format(string, sizeof(string), "*%s unbuckles his seatbelt.", sendername);
                ProxDetector(8.0, playerid, string,0x33CCFFAA,0x33CCFFAA,0x33CCFFAA,0x33CCFFAA,0x33CCFFAA);
            }
            return 1;
        }
        else
        {
            SendClientMessage(playerid, -1, "You're not in any vehicle!");
            return 1;
        }
    }


Re: Multiply problems - jakejohnsonusa - 27.03.2014

Remove this line:

pawn Code:
if(ES[playerid] == 1) return SendClientMessage(playerid, -1,"{FF6A22}INFO: {FFFFFF}You are already starting your engine.");


Re: Multiply problems - Lajko1 - 27.03.2014

Okay but this doesn't fix the problems :S

Re: Multiply problems - Lajko1 - 28.03.2014

Please help guys, did I fucked up with returns? Because I was trying and I can't figure out what is wrong :S the problem is when I added those cmds I posted here now if I write any cmd /abcd or /a /bb /bbcag it will says "INFO: USAGE: /csb bla bla bla" what I did wrong ? :S

EDIT: Okay I was testing a bit and commented commands I added so when I added this command:
It messed the commands, so when I wrote /engine it was ok.. but when I wrote any cmd that doesn't exist it said error message from one of the cmds... can some one help please REP+ it's urgent :S

pawn Code:
if(strcmp(cmdtext, "/engine", true) == 0) {
        if(!IsPlayerInAnyVehicle(playerid)) return SendClientMessage(playerid, -1,"{FF6A22}INFO: {FFFFFF}You need to be in vehicle to use this command.");
        if(GetPlayerState(playerid) != PLAYER_STATE_DRIVER) return SendClientMessage(playerid, -1,"{FF6A22}INFO: {FFFFFF}You need to be driver to use this command.");
        if(Carinfo[vehicleid][F] < 1) return SendClientMessage(playerid, -1,"{FF6A22}INFO: {FFFFFF}This vehicle is out of fuel.");
        if(ES[playerid] == 1) return SendClientMessage(playerid, -1,"{FF6A22}INFO: {FFFFFF}You are already starting your engine.");
        if(NoFuel(GetPlayerVehicleID(playerid))) return SendClientMessage(playerid, -1,"{FF6A22}INFO: {FFFFFF}You can't do that on this vehicle.");
        if(engine == 1) {
            KillTimer(GasTimer[playerid]);
            SetVehicleParamsEx(vehicleid,0,lights,alarm,doors,bonnet,boot,objective);
            SendClientMessage(playerid, -1,"{00FF00}INFO: {FFFFFF}Engine turned off.");
            TextDrawHideForPlayer(playerid, vName[playerid]);
            TextDrawHideForPlayer(playerid, vSpeed[playerid]);
            TextDrawHideForPlayer(playerid, vGear[playerid]);
            TextDrawHideForPlayer(playerid, vHP[playerid]);
            TextDrawHideForPlayer(playerid, vFuel[playerid]);
            TextDrawHideForPlayer(playerid, HP[playerid]);
            TextDrawHideForPlayer(playerid, Speed[playerid]);
            TextDrawHideForPlayer(playerid, Gear[playerid]);
            TextDrawHideForPlayer(playerid, Veh[playerid]);
            TextDrawHideForPlayer(playerid, Fuel[playerid]);
            return 1;
        } else {
            SendClientMessage(playerid, -1,"{00FF00}INFO: {FFFFFF}You twisted the key, wait 4 seconds.");
            ES[playerid] = 1;
            EngTimer[playerid] = SetTimerEx("EngStart", 4000, false, "d", playerid);
        }
        return 1;
    }


Re: Multiply problems - Lajko1 - 28.03.2014

Ah c'mon please guys, REP+ what should be wrong and ideas?