Server Ports Problem - Printable Version

Server Ports Problem - Printable Version

+- SA-MP Forums Archive (https://sampforum.blast.hk)
+-- Forum: SA-MP Server (https://sampforum.blast.hk/forumdisplay.php?fid=6)
+--- Forum: Server Support (https://sampforum.blast.hk/forumdisplay.php?fid=19)
+--- Thread: Server Ports Problem (/showthread.php?tid=475026)

Server Ports Problem - TheSnaKe - 11.11.2013

Hello there, i tried to open my ports for my SA-MP server but.... I did everything you can see this in the picture, i watched tutorials, i have read all the topics for this problem but still...If anyone can help me please.

The picture: http://oi41.tinypic.com/4ke2o2.jpg

The Server.cfg : http://tinypic.com/view.php?pic=2a7w...5#.UoBHHRDljIU

Re: Server Ports Problem - Alexander8 - 11.11.2013

Did u add the port in the windows firewall exceptions ? And try to add another port like 7751 or w/e

Re: Server Ports Problem - HoboGamings - 11.11.2013

is your IPV4 address 192.168.1.2 as i see in the picture if not then make sure that is if this doesnt help all i can say is try downloading this software see if this helps http://www.portforward.com/store/PFCSetup.exe

Re: Server Ports Problem - TheSnaKe - 12.11.2013

How can i add the port in the Windows Firewall? Because i think this is the problem.

Re: Server Ports Problem - Akira297 - 12.11.2013

Quote:

Originally Posted by TheSnaKe

How can i add the port in the Windows Firewall? Because i think this is the problem.

You made it through your fire-wall on your router. Go to your control panel network settings < firewall < settings. Anyways, you might want to blur out your IP address.

Re: Server Ports Problem - linuxthefish - 12.11.2013

Control Panel\System and Security\Windows Firewall\Customize Settings

Then re-run the server and click allow, then test your server using some SA-MP checker. Also try setting the protocol to UDP. Can you connect to 192.168.1.2 when the server is running?

Re: Server Ports Problem - TheSnaKe - 12.11.2013

Quote:

Originally Posted by linuxthefish

Control Panel\System and Security\Windows Firewall\Customize Settings

Then re-run the server and click allow, then test your server using some SA-MP checker. Also try setting the protocol to UDP. Can you connect to 192.168.1.2 when the server is running?

Yes, i can run it on 192.168.1.2, Am going to add the ports to the firewall now.

Re: Server Ports Problem - TheSnaKe - 12.11.2013

I can find that my server is open in the Samp Checker, but when i add the Ip in the samp i can't find it online.

Re: Server Ports Problem - KevinPRINCE - 13.11.2013

Need help with ports? Go here (Try something innovating to thank me ;P)

Re: Server Ports Problem - TheSnaKe - 13.11.2013

Quote:

Originally Posted by KevinPRINCE

Need help with ports? Go here (Try something innovating to thank me ;P)

.... I tried all this and you can read what i said, i said i have seen all the tutorials... but still this problem with ports...

i need answer for this (I can find that my server is open in the Samp Checker, but when i add the Ip in the samp i can't find it online. )