announce is 1, but server isn't shown in an internet tab .

announce is 1, but server isn't shown in an internet tab . - Printable Version

+- SA-MP Forums Archive (https://sampforum.blast.hk)
+-- Forum: SA-MP Server (https://sampforum.blast.hk/forumdisplay.php?fid=6)
+--- Forum: Server Support (https://sampforum.blast.hk/forumdisplay.php?fid=19)
+--- Thread: announce is 1, but server isn't shown in an internet tab . (/showthread.php?tid=406373)

announce is 1, but server isn't shown in an internet tab . - pasha97 - 10.01.2013

The problem is written in the title of this thread!
announce is 1; if i give someone the ip, they are able to connect to the server, but noone can see it in the internet tab. So, has anybody a solution?

Re: lanmode is 1, but server isn't shown in an internet tab . - pasha97 - 10.01.2013

Quote:

Originally Posted by Unirom Shaw

To make ur server shown in hosted tab u must host it with hosted tab, the cost will be increased
Like Volt Host,

i dont speak about hosted tab, i speak about internet tab!

Re: lanmode is 1, but server isn't shown in an internet tab . - Vince - 10.01.2013

Lanmode has nothing to do with this at all. Lanmode makes the server use more bandwith and is - as the name suggests - intended for LAN games. It can take from 15 minutes to an hour for your server to propagate to the master list.

Re: lanmode is 1, but server isn't shown in an internet tab . - Unirom Shaw - 10.01.2013

Function lanmode 1 it will make ur game smoother but will increase packet data
to make ur server shown in internet tab set announce to 1
Some config:
hostname
--------
Parameters:
string

Description:
Specifies the hostname shown in the server browser

port
----
Parameters:
int

Description:
Specifies the port to listen on.
This port is used for game connections, rcon connections, and for querying.

maxplayers
----------
Parameters:
int

Description:
Specifies the maximum amount of players.

lanmode
-------
Parameters:
int (0 or 1)

Description:
Turns lanmode on (1) or off (0). Lanmode (as the name suggests) is for use on LAN games, where bandwidth is not a problem. Lanmode sends data at a higher rate, for a smoother game.

announce
-------
Parameters:
int (0 or 1)

Description:
Announces your server to the 'Internet' server list in the SA:MP browser. On (1) or Off (0).

weburl
------
Parameters:
string

Description:
Specifies the URL shown in the server browser, which is associated to the server.

rcon_password
-------------
Parameters:
string

Description:
Specifies the password needed to connect to rcon, or login to rcon ingame.

gamemode0 - gamemode15
----------------------
Parameters:
string
int

Description:
Specifies the rotation settings. The first parameter sets the game mode name. The second is the number of times it will repeat.
You can use gamemode0 to specify the first gamemode, gamemode1 to specify the second, etc.

Re: lanmode is 1, but server isn't shown in an internet tab . - pasha97 - 10.01.2013

Quote:

Originally Posted by Unirom Shaw

Function lanmode 1 it will make ur game smoother but will increase packet data
to make ur server shown in internet tab set announce to 1

i made a typo. I meant announce is 1. Sorry for that

Re: announce is 1, but server isn't shown in an internet tab . - Samp_India - 10.01.2013

it appears that you have masked your ip with a hostname but in the samp client on internet tab your server appear by its dynamic ip and not by the hostname.

Re: announce is 1, but server isn't shown in an internet tab . - pasha97 - 10.01.2013

Quote:

Originally Posted by Samp_India

it appears that you have masked your ip with a hostname but in the samp client on internet tab your server appear by its dynamic ip and not by the hostname.

i can see my server now, but there is no ip, only port

Re: announce is 1, but server isn't shown in an internet tab . - Samp_India - 10.01.2013

Can you show me a screen shoot?

Re: announce is 1, but server isn't shown in an internet tab . - pasha97 - 10.01.2013