Wifi Can't Login! - Printable Version
+- SA-MP Forums Archive (https://sampforum.blast.hk)
+-- Forum: Other (https://sampforum.blast.hk/forumdisplay.php?fid=7)
+--- Forum: Everything and Nothing (https://sampforum.blast.hk/forumdisplay.php?fid=23)
+--- Thread: Wifi Can't Login! (/showthread.php?tid=354580)
+- SA-MP Forums Archive (https://sampforum.blast.hk)
+-- Forum: Other (https://sampforum.blast.hk/forumdisplay.php?fid=7)
+--- Forum: Everything and Nothing (https://sampforum.blast.hk/forumdisplay.php?fid=23)
+--- Thread: Wifi Can't Login! (/showthread.php?tid=354580)
Wifi Can't Login! - kbalor - 27.06.2012
I am using EDIMAX BR-6226n wifi router. But after type my ip in browser and i login with the same username and password as default nothing happens. Ive also try other passwords like. admin/admin Blank/1234 Admin/1234 and still the same i just want to to login again.
Re: Wifi Can't Login! - Neil. - 27.06.2012
If you can't login, you can refer to where you bought the router itself, else if you don't want to, It may or may not have a reset button built to the router... You can hold it for about 10 seconds, and it will be returning to the default username and password details
Re: Wifi Can't Login! - kbalor - 27.06.2012
Quote:
|
Originally Posted by Ken97
 If you can't login, you can refer to where you bought the router itself, else if you don't want to, It may or may not have a reset button built to the router... You can hold it for about 10 seconds, and it will be returning to the default username and password details
|
Re: Wifi Can't Login! - kbalor - 27.06.2012
How to set up port forward? i have example here.
Re: Wifi Can't Login! - Neil. - 27.06.2012
Quote:
|
Originally Posted by kbalor
How to set up port forward? i have example here.
|
192.xxx.x.xxx or something similar on the Private Ip tab
Next on the type tab, you can either set it to tcp or udp or both
Then finally on your port range, for example, if you want to port forward your port 80 then input 80... Just leave the comments tab (Optional)
Re: Wifi Can't Login! - kbalor - 27.06.2012
Quote:
|
Originally Posted by Ken97
Input your desired ip to be forwarded for example:
192.xxx.x.xxx or something similar on the Private Ip tab Next on the type tab, you can either set it to tcp or udp or both Then finally on your port range, for example, if you want to port forward your port 80 then input 80... Just leave the comments tab (Optional) |
Anyway what about virtual server?? whats the difference of both?
Re: Wifi Can't Login! - Neil. - 27.06.2012
Yes that's fine,
and about your 2nd question, idk really