Request: Making Server Public - Printable Version

+- SA-MP Forums Archive (https://sampforum.blast.hk)
+-- Forum: SA-MP Server (https://sampforum.blast.hk/forumdisplay.php?fid=6)
+--- Forum: Server Support (https://sampforum.blast.hk/forumdisplay.php?fid=19)
+--- Thread: Request: Making Server Public (/showthread.php?tid=340312)

---

Request: Making Server Public - Ekins - 06.05.2012

I have tried to make my server public recently, but my server is still not public.

• I have added Inbound and Outbound Rules on my firewall, they are both on port 7777.
• I have port-forwarded to the device I'm running the server off through my router.

My server does still not show public, I tried using canyouseeme.org to try and verify my port was open and it said connection timed out (If this URL is classed as advertising please remove.)

I'll provide images below, I also provided an image of my serverfile.

Can anybody help.

Images.

---

Re: Request: Making Server Public - Ekins - 07.05.2012

30 Views not 1 reply. lol

BUMP

---

Re: Request: Making Server Public - kazekene - 13.05.2012

go to http://www.whatismyip.com/ and add that IP on your samp client with the 7777 port

If it still doesn't work, make sure that the IP you've portfowarded is the IP you see when you do this:

1st. Press the windows button and then search for cmd
2nd. write ipconfig on the cmd console
3. Check your IP

---

Re: Request: Making Server Public - HaZaRaS™ - 13.05.2012

Just follow this !
||||||||

System name	Start Port	End Port	Server ip Address
GTASAMP	7777	7777	"CMD" and then type ( ipconfig ) Copy the ipv4 addre and put here

You'll have to name your SYSTEM NAME to " GTASAMP" and then save it and then goto " SERVER.CFG "
and do it
Put the lanmode to 1

---