SA-MP Forums Archive
Sound - Printable Version

+- SA-MP Forums Archive (https://sampforum.blast.hk)
+-- Forum: Other (https://sampforum.blast.hk/forumdisplay.php?fid=7)
+--- Forum: Everything and Nothing (https://sampforum.blast.hk/forumdisplay.php?fid=23)
+--- Thread: Sound (/showthread.php?tid=285797)



Sound - iJumbo - 25.09.2011

hi all ..

if there someone who understand electronics or audio could help me


i have a jack(stereo) attached to the computer This cable has 3 wires (red, yellow, white) what i have to weld to make two mono RCA cables?

Example:



Re: Sound - Babul - 25.09.2011

http://en.wikipedia.org/wiki/TRS_connector
soldering is fun ^^

btw: the mass-cable from the computer sided plug can easily be split into 2 separate cables, you need a mass at each connection, else you'll hear bad (most prolly: none at all) noise. the inner cables (well isolated one at each moni plug) are transmitting the "true" signal. the outer fiddled cables are the isolation - the mass.
i didnt read that wiki page, since iam already used to do little fixing stuff like that. iam sure youll find everything you need there heh

Ersa FTW
[ame]http://www.youtube.com/watch?v=ftKAnFBAByk[/ame]


Re: Sound - iJumbo - 25.09.2011

its good to connect Mono to (Center,Subwoofer) speackers? and thx for reply


Re: Sound - Babul - 25.09.2011

a subwoofer uses 1 channel only, so: yes!
hence those "5.1" systems. they use 4 sattelite boxes (mid-high frequencies), while the subwoofer uses 1 line. thats indicated by the ".1" (like being subtracted from the "5." amount of speakers (i used "boxes" and "speakers", its the same thing)...
oh, better have a look here, i suck at explaining some(MOST)times: http://en.wikipedia.org/wiki/5.1