Using xbox 360 controller with xpadder - Printable Version
+- SA-MP Forums Archive (https://sampforum.blast.hk)
+-- Forum: SA-MP (https://sampforum.blast.hk/forumdisplay.php?fid=3)
+--- Forum: Client Support (https://sampforum.blast.hk/forumdisplay.php?fid=16)
+--- Thread: Using xbox 360 controller with xpadder (/showthread.php?tid=284931)
+- SA-MP Forums Archive (https://sampforum.blast.hk)
+-- Forum: SA-MP (https://sampforum.blast.hk/forumdisplay.php?fid=3)
+--- Forum: Client Support (https://sampforum.blast.hk/forumdisplay.php?fid=16)
+--- Thread: Using xbox 360 controller with xpadder (/showthread.php?tid=284931)
Using xbox 360 controller with xpadder - agnew07 - 21.09.2011
Does anyone else use there xbox 360 controller or any other controller with xpadder or a different app because the default controls are horrible and with xpadder they are not much better, I have searched on ****** about it and alot of people have the same problem with no fix?
Re: Using xbox 360 controller with xpadder - haydugjr - 24.09.2011
Use San Andreas Advanced Control.
Re: Using xbox 360 controller with xpadder - agnew07 - 25.09.2011
I did but it wouldn't open but it showed up in the process tab and took up over 80% cpu usage on vista.
Re: Using xbox 360 controller with xpadder - Kieren - 25.09.2011
I use MotionJoy for my PS3 controller, BUT it does support the Xbox 360 controller too!
Edit: Just double checked, not sure if it does support but there is an option for a 360 device. Not tried it though.
Re: Using xbox 360 controller with xpadder - agnew07 - 25.09.2011
Do you have to configure it like xpadder or does it configure itself because there is no way to configure xpadder to work as if you were playing on an xbox.
Re: Using xbox 360 controller with xpadder - Kieren - 25.09.2011
MotionJoy doesn't need much configuration;
1. Install the software & drivers
2. Select the Xbox 360 Emu option, then click options (Make sure you click the Enable button!)
3. Select the drop down menu, and choose the Xbox 360 Controller as the input (Again, click Enable)
Note: You will need to configure the Joypad settings in-game for the controller, as they will be messed up.
Since I use the PS3 controller, I configured the buttons to how they worked on the PlayStation (X = sprint, Square = Jump etc). In-game when configuring, it will appear as "Joy 2, Joy 3" etc.
You won't have to go through this all the time, it's just the initial setup that might take a bit of configuration. Just remember to load MotionJoy up if you want to use your controller
Re: Using xbox 360 controller with xpadder - Markx - 25.09.2011
+Rep for you.^
Re: Using xbox 360 controller with xpadder - BigETI - 25.09.2011
Try to use PPJoy (a virtual gamepad driver) and with GlovePIE you can advanced emulate keys of bunch of gamepads, keyboards, mice, other misc stuff etc.
I use to play some games with selfmade Wiimote (Wii Gamepad) scripts.